If it becomes loose it may be dangerous. Attention * Respectez la polarité des piles. * Evitez de mélanger nouvelles et anciennes piles. * ES'assurer de bien attacher la lumière au vélo. Il est dangereux de rouler avec une lumière qui n'est pas fixée solidement.

............ 10666001101 _ __ m ■ ■ m b ■ Copyright© 2001 CAT EYE Co.,Ltd. ABOUT INSTALLATION CCMAT10104171 p =Sn In order to make this model suitable for MTB, some of the parts have been changed. When mounting to bicycle, follow the explanation written in this sheet, not the instruction manual. Parts O Bracket ©Wire © Sensor © Magnet © Bracket Rubber Pad (2 pcs © Nylon Tie (5 pcs.) © Spiral Tube © Lithium Battery CR2032 1. Installation (Instead of following the explanation in 11-12 pa

_— MSC2DxMM-010604 1 Printed in Japan 10666001201 For the sake of easy installation and operation, some components have been changed. When installing to your bicycle, follow the explanation written in this sheet, not the Quick Start manual. Parts Make sure that the following parts are included in the package. O Bracket (with 2Dx attachment) G Rubber Pad G Sensor G Band Holder Pad G Sensor Band-A (L/S) G Screw O Sensor Band-B G Magnet G Nylon Tie © Attachment for Aerofork Installation F

Please keep this manual for future reference. NAMES Please make sure that all the following parts are in the package. * The package for Solo includes each 1 set of lamp unit(Spot Bulb), bracket, rubber pad; and the cord of the remote switch is single (not furcated). FOR SAFE OPERATION (IMPORTANT) • Never short-circuit the terminal of the battery and the plug of the battery charger. It may cause the battery to overheat, resulting in fire or damage of the components. • Securely connect the plug so

Type your name, address, date of purchase and the situation of trouble clearly, and send it to the appropriate service center together with the product. Insurance, handling and transportation charges shall be borne by the customer. After being repaired or replaced, the product will be shipped back to the customer. Address for service: 2-8-25 Kuwazu, Higashi Sumiyoshi-ku Osaka 546-0041 JAPAN Attention: CAT EYE CO., LTD. Customer Service Section Phone: 81-6-6719-7781 Fax: 81-6-6719-2362 Service &

This is a unique high power 12 volt system. Before operating, thoroughly familiarize yourself with this manual so that you understand the light's safe and correct operation. Please keep this manual, along with the warranty card, for future reference. NAMES Make sure that the following parts are included in the package. U.S. Pat. No. 5735441 and Design Patented Copyright© Jul.1999 CAT EYE Co., Ltd. Printed in Japan MH31W-011120 0688540 3 Metal Halide Lighting System STADIUM LIGHT 3 HL-MH310 INSTR

Pending Copyright©2007 CATEYE Co., Ltd. ENG 6 2 3 6 5 7 LOCK 1 Installing Bracket Attach the bracket to the handlebar. 1. Wrap the bracket strap around the handlebar, and put it in the dial. 2. Securely tighten the strap by turning the dial. CAUTION!: • Make sure to tighten the dial by hand. If you tighten it too hard with a tool, the screw threads may be stripped. • When the angle adjustment on the right and left sides is loose, tighten the screw. 3. Cut off the excess bracket strap extending f

Tighten the bolt securely. (For a more secure fit, use a screwdriver.) Rubber Pad Rubber Pad Bolt under the bars on top of the bars Bracket (H-27) Bracket (H-27) Using the Extension spacer H-27 LS (Option) 1. Loosen the screw of the spacer and turn the spacer 180°. Tighten the screw securely again. 2. Insert the extension spacer to the lamp body from the rear. 3. When removing the lamp body from the bracket, remove it together with the extension spacer. Lamp Unit Slide Bracket Lamp Body Warning!