Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Read this "REFERENCE GUIDE" when you want to know more about the CAT EYE OS 1.0. Important Warning! • Do not give excessive attention to the monitor or the data. Always pay attention to the road, traffic and your surroundings. • Keep this product away from children. If children should use this product, they should have adult supervision. • Dispose of the used batteries properly. Keep batteries out of children's reach. In case a battery is swallowed, contact a doctor immediately. Caution! • Avoid dropping or severely jarring the main unit. • Avoid exposing the main unit to direct sun light for extended periods of time. • Do not disassemble the main unit. • Do not apply chemicals (thinner or benzene) to the unit. • Static electricity could cause a function error, resulting in abnormal display of the data. • Periodically check the positions and mounting conditions of the magnet and the sensor. 1. Buttons -----------------------------------------------------------------------------------3 2. Functions --------------------------------------------------------------------------------4 3. Restart/Format/Setup ----------------------------------------------------------------6 4. Menu Screen ------------------------------------------------------------------------8-12 5. Troubleshooting ---------------------------------------------------------------------13 6. Specifications ------------------------------------------------------------------------14 • Optional parts/Limited Warranty -----------------------------------------------15 • Registration ---------------------------------------------------------------------------16 OS 1.0 1. Buttons 1. Buttons RESTART button button (ENTER) 1 Screen 2 Battery life indicator 3 Selected tire icon 4 Auto mode icon 5 Speed scale icon See how the four buttons work in the various modes. 6 Pacer 7 Selected function icon START/STOP button (ENTER) Normally this button starts and stops timer that effects the other functions like average speed, etc. When measuring, the speed scale icon flashes. While setting up the unit this button enters and completes each selection. MODE button (SELECT: FWD/REV) Normally this button switches the function of the lower display. In the setting mode this button forwards and reverses among options. The right button is FWD (forward) and the left button is REV (reverse). MENU button This button is used to review past data or to change settings. RESTART button This button is used only after replacing the battery or when screen freezes or appears erratic. Reset operation (Resetting the screen data) Press START/STOP/ENTER button and either of MODE/SELECT but- Press simultaneously ton simultaneously to reset daily ride data of Trip Distance, Average Speed and Elapsed Time. Total Distance (Odo) and Clock Time are not effected. START/STOP MENU button REV FWDMODE button (SELECT) OS 1.0 2. Functions 2. Functions Current Speed Current Speed always displays in the upper display. The data is updated once a second. When the font size is 100%, Current Speed appears between Clock Time and Elapsed Time and is indicated by the flashing Spd icon. 0.0(3.0)-65.9 mph [0.0(4.0)-105.9 km/h] Elapsed Time This is the ride time from the start to the present and shown in hours, minutes and seconds. Performing a reset operation returns the data to zero. After 9.59.59 the timer will continue counting from 0.00.00. 0.00.00 - 9.59.59 Trip Distance The trip distance from the start to the present time is displayed. Performing a reset operation returns the data to zero. 0.00 - 99999.99 mile [km] Average Speed The average speed from the start to the present time is displayed. Performing a reset operation returns the data to zero. When the trip distance exceeds 99999.99km or the elapsed time exceeds 99:59'59", [ERROR] will appear on the display and calculation of Average Speed will no longer compute. 0.0 - 65.9 mph [0.0 - 105.9 km/h] Maximum Speed The maximum instantaneous speed from the start to the present time is displayed. Performing a reset operation returns the data to zero. Maximum speed is calculated regardless if the ride timer is on. 0.0(3.0)-65.9 mph [0.0(4.0)-105.9 km/h] Total Distance The odometer distance is accumulated continuously. It is not effected by performing a reset operation. Odometer distance is calculated regardless if the ride timer is on. 0.0 - 999999.9 mile [km] Clock Time Time is displayed in 12h or 24h mode. * The font size of the sample screens in this page is 70:30. OS 1.0 Pace arrow The pace arrow indicates if the current speed is faster or slower than the average speed. If the current speed is equal to the average speed, both arrows appear. Eco mode (Sleep mode) When the main unit is left without receiving any signal for about five minutes, the display goes blank. When any main button is pressed, or the wheel starts again, the screen wakes up and returns to normal display. Auto mode When Auto Mode is on, the unit automatically starts/stops measuring functions rel...