Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
7. Cycle Set to your preferred value for the digit. 8. Push Mode to select. 9. Repeat steps 7 and 8 to select the other three digits. 10. Push Mode. 10. Cycle Set for the first digit of Odometer. 11. Push Mode to select the digit. 12. Repeat steps 10 and 11 to select the other digits of Odometer. The computer returns to current speed display. Setting the computer To set Clock 1. Cycle Mode to CLK. 2. Hold Mode. 3. Cycle Set to 12 or 24 hour clock. 4. Push Mode to select clock. 5. Cycle Set to the hour. 6. Push Mode to select. 7. Cycle Set to the minute. 8. Push Mode to select. The computer returns to current speed. To Restart the trip modes The trip modes include TRP, AVG, TME, and MAX. This operation sets all four values to zero, allowing the computer to display information for a single ride. 1. Cycle Mode to MAX. 2. Hold Set, and do not let up until after completing step 3. 3. Hold Mode. The Max setting restarts at .0.. Second wheel size (Wheel 2) The following features are only on the Incite 8i. The second wheel size allows the computer to calculate using the wheel size of a second bike. For example, you can use the computer on your road bike with 700c racing wheels, then move it to your mountain bike with 26” wheels. In both cases, the trip distance and speed will be accurate. The computer adds the data for the two wheel sizes resulting in the total distance (ODO). Step 8 in these instructions assumes you want to leave the odometer at its existing setting. If you want to change the odometer, refer to the steps in To set the odometer and wheel size. To set second wheel size 1. Cycle Mode to ODO. 2. Hold Mode. The mileage conversion (MH or KMH) will flash. 3. Cycle Set to your preferred conversion. 4. Press Mode to select . The wheel size for Wheel 1 appears. 5. Hold both Mode and Set at the same time. The wheel select icon appears in the upper left corner. 6. Cycle Set to your second wheel size. 7. Push Mode to select. 8. Push Mode to select each digit of the odometer. The computer returns to current speed. To select Wheel 2 1. Cycle Mode to TRP. 2. Hold Mode to select other wheel size. Setting the computer INCITE 9I AND 11I Setting the 9i and 11i is done by pushing the three buttons in a specific sequence. The button on the side of the computer is the Set button. The two buttons on the bottom are the left and right Mode buttons. If the Mode button is called out in the directions without specifying which one, you may push either one and the computer will accordingly scroll in a different direction. To set Units (distance and temperature) This setting tells the computer which conversion to use: metric or SAE (“English”) 1. Cycle Mode to Max. 2. Hold Set. 3. Cycle Mode to your preferred setting (MPH for miles or KPH for kilometers). 4. Push Set to select. The computer displays the temperature icons. 5. Cycle Mode to your preferred setting (F for Fahrenheit, C for Celsius). 6. Push Set to select. The computer returns to the current speed display. To set Odometer By default, the odometer always starts at ‘0’. If desired, the odometer can be manually set at another value. 1. Cycle Mode to ODO. 2. Hold Set. The computer displays the bottom row of digits with the first digit flashing. 3. Cycle Mode to your preferred value. 4. Press Set to select. The next digit flashes. 5. Repeat steps 3 and 4 until all digits have been selected. After the last digit is selected, the computer returns to the current speed display. To set Clock The clock can be set to 12 hours or 24 hours. When setting your hours value, choose accordingly. You will set the 12 or 24 hour selection after setting the values. 1. Cycle Mode to CLK. 2. Hold Set. The computer displays the clock, with hours flashing. 3. Cycle Mode to your preferred value. 4. Push Set to select. 5. Cycle Mode to your preferred value for minutes. 6. Push Set to select. 7. Cycle Mode to your preferred value for hours format (12 or 24). 8. Push Set to select. After the hours format is selected, the computer returns to the current speed display. Wheel sizes The 9i and 11i allow you to program the computer to calculate using two different wheel sizes. The second wheel size allows the computer to calculate using the wheel size of a second bike. For example, you can use the computer on your road bike with 700c racing wheels, then move it to your mountain bike with 26” wheels. In both cases, the trip distance and speed will be accurate. The computer adds the data for the two wheel sizes resulting in the total distance (ODO). In performing these steps, note that the wheel icon in the upper left corner has two values: Wheel 1 is a circle (Figure 13) and Wheel 2 is a circle with a semi-circle surrounding it. To set the wheel size 1. Cycle Mode to TME. 2. Hold Set. The wheel selection icon appears in the upper left corner. 3. Cycle Set to your preferred wheel. 4. Cycle Mode to your preferred wheel size. For a custom wheel size, see To set a custom wheel size 5. Hold Set to select. Th...
Эта инструкция также подходит к моделям:Велосипеды - 6i, 8i, 9i, 11i (366.34 kb)