Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
If you have any questions about using your QR axle, please consult your bicycle manual or Burley dealer. Install the standard hitch (included with your Burley trailer) onto the Adapter and secure with the provided nut. Tighten to 20 N-m (15 ft-lb). It may be necessary to grip the knurled portion of the Adapter with pliers while tightening the nut. Refer to your Burley trailer manual for information on using your Burley hitch. Solid Axle Adapter Installation Remove non-drive (left) side axle nut and retain. If your hub uses non-turn washers, these should remain on the axle. Check exposed axle length by placing Adapter against the dropout (or non-turn washer, if present). If the axle extends beyond the last band, add one or two of the provided washers until the axle does not extend beyond the last band. Thread on the Adapter and tighten to 30 N-m (22 ft-lb) using a 6mm hex key. Do not over tighten, as this can damage the Adapter. Install Burley standard hitch onto the Adapter and secure using the axle nut removed earlier. Tighten to 20 N-m (15 ft-lb). Refer to your Burley trailer manual for information on using your Burley hitch. m BURLED Eugene, OR USA PH 541.687.1644 800.423.8445 FAX 541.687.0436 burley@burley.com : burley.com Hitch Alt Adapter Manual: RTFM: Rev 07.2011...
Эта инструкция также подходит к моделям:Велосипеды - Flatbed (115.6 kb)