|
Фото и характеристики Life Fitness C7 |
Фрагмент инструкции
and welcome to the world of Life Fitness and the Lifecycle C7i / C9i exercise bike. The following Parts Identification Listing and the step-by-step installation procedures have been assembled to make the set-up of your exercise bike as quick and easy as possible. Please take special note of the following important points prior to choosing a location and beginning assembly of the Lifecycle exercise bike… IMPORTANT SAFETY INSTRUCTIONS ! . DO NOT locate the Lifecycle exercise bike outdoors, near swimming pools, or in areas of high humidity. . DO NOT operate your Lifecycle exercise bike if it has been dropped, damaged, or even partially immersed in water. Contact Life Fitness Customer Support Services at the number on the back page of this Installation Instruction Guide. . DO NOT locate the Lifecycle exercise bike any closer than 30 inches ( 76 cm ) to a television set. . DO NOT locate additional Lifecycle exercise bikes any closer than a minimum of 42 inches ( 107 cm ) from center to center to avoid interference (cross talk) between Heart Rate monitors. . DO keep the area around your Lifecycle exercise bike clear of any obstructions, including walls and furniture. . DO verify the contents of the delivery carton against the accompanying Parts Listing prior to setting the cartons and shipping material aside. If any parts are missing, contact Life Fitness Customer Support Services at the number listed on the back page of this Installation Instruction Guide. Save the shipping cartons in case of return. . DO read the entire Operation Manual prior to attempting to operate this machine as this is essential for proper use. TOOLS REQUIRED FOR ASSEMBLY... Phillips screwdriver, 1/2” wrench PARTS DESCRIPTION 1 STABILIZER/HANDLEBAR BOLT 0017-00101-0933 Qty:5 2 CONSOLE SCREW 0017-00101-1253 Qty: 4 3 SEAT WITH SEATPOST ASSEMBLY AK17-00120-0003 Qty: 1 4 COLLAR 0K18-01156-0001 Qty: 1 5 HANDLEBAR ASSEMBLY AK18-00215-0000 (Model C7i) AK52-00004-0000 (Model C9i) Qty: 1 6 DISPLAY CONSOLE ASSEMBLY Qty: 1 7 STABILIZER BAR AK18-00070-0000 Qty: 1 8 9V ALKALINE BATTERY 0017-00003-0757 Qty: 1 1 2 1” 2” 3” 4” 5” 7 3 4 1 2 8 6 1 5 CAUTION: Improper insertion of the seat pin may result in serious injury. Always make sure the pin is properly engaged in the seat post hole prior to using the Lifecycle exercise bike 1. Before proceeding, familiarize yourself with the parts of the Lifecycle exercise bike and make sure that you have received all the items described in the Parts List. 2. Remove the STABILIZER BAR (#7) from the carton base. Use the empty CONSOLE CARTON to raise the rear of the LIFECYCLE exercise bike as shown. Remove the two BOLTS (#1) from the bottom of the SHIPPING STABILIZER, save the BOLTS and store the SHIPPING STABILIZER with the other shipping containers. 3. Use the same two BOLTS that held the SHIPPING STABILIZER in place to attach the STABILIZER BAR as shown. Make certain that the BOLTS are tight and the STABILIZER BAR is flush against the frame. Remove the shi...
Эта инструкция также подходит к моделям:Велосипеды - C9 (293.41 kb)