Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
SAFETY PRECAUTIONS . READ BEFORE USING . . . . . . . . . . . . . . . 1 SECTION 2 . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SECTION 3 . OPERATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SECTION 4 . BATTERY REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SECTION 5 . MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SECTION 6 . TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SECTION 7 . INSTALLING OPTIONAL MAGNIFYING LENS . . . . . . . . . . . . . . . . . . . . 12 SECTION 8 . REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SECTION 9 . LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 SECTION 1 . SAFETY PRECAUTIONS . READ BEFORE USING Warning! Watch Out! There are possible hazards as shown in the adjoining symbols. Read and follow Section 1 for all safety symbols. ARC RAYS can burn eyes and skin. Arc rays from the welding process produce intense visible and invisible (ultravio- let and infrared) rays that can burn eyes and skin. Sparks fly off from the weld. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or watching (see ANSI Z49.1 and Z87.1 listed in Safety Standards). Refer to Shade and Sensitivity charts in Section 2. Wear approved safety glasses with side shields under your helmet. Use protective screens or barriers to protect others from flash and glare; warn others not to watch the arc. Wear protective clothing made from durable, flame-resistant material (leather and wool) and foot protection. WELDING HELMETS do not provide unlimited eye, ear and face protection. Use impact resistant safety spectacles or goggles and ear protection at all times when using this welding helmet. Do not use this helmet while working with or around explosives or corrosive liquids. Do not weld in the overhead position while using this helmet. Inspect the auto-lens frequently. Immediately replace any scratched, cracked, or pitted cover lenses or auto-lenses. NOISE can damage hearing. Noise from some processes or equipment can damage hearing. Wear approved ear protection if noise level is high. Page 1 SECTION 2 . SPECIFICATIONS Viewing Field (XLi, Xlix) 97mm x 47mm/3.81” x 1.85” Viewing Field (Elite) 97mm x 60mm/3.81” x 2.62” Reaction Time (XLi) 0.0000555sec (1/18,000) Reaction Time (Xlix, Elite) 0.0000500sec (1/20,000) Available Shades Darkened State: No. 9 . No. 13 / Light State: No. 4 provides continuous UV and IR protection Sensitivity/Grind Mode Control Adjusts for varying ambient light and welding arc Delay Control Slows lens dark-to-light state between 0.1 and 1.0 seconds Automatic Power Off Shuts lens Off 15.20 minutes after last arc is struck Low Battery Indicator Red LED light illuminates to indicate 2.3 days remaining battery life Power Supply CR2450 Lithium Batteries (Miller Part No. 217 043) Sensors Independent/Redundant (Two.XLi, Xlix) (Four.Elite) Operating Temperature 14F to 131F / .10C to +55C . When stored in extremely cold temperatures, warm helmet to ambient temperature before welding. Storage Temperature .4F to 158F / .20C to +70C . When stored in extremely cold temperatures, warm helmet to ambient temperature before welding. Total Weight XLi & Xlix: 453.6g (16oz.) / Elite: 510.3g (1lb 2oz.) Standards ANSI Z87.1 and DIN/CE/TUV (CSA: Xlix, Elite) Warranty 2 years from date of purchase (see Section 9) . The helmets in this manual are covered by one or more of the following patents: U.S. Patent . No. 6,552,316, No. 6,483,090, No. 6,614,409 U.S. Patent Application . No. 29/223,100, No. 11/053,977 DE. Patent . No. 199 59 944 C2, No. 199 59 945 C2 FR. Patent . No. 9916004 Page 2 SECTION 3 . OPERATION INSTRUCTIONS Auto-Darkening Lens Controls Two different lens assemblies are shown. Refer to the illustra- tion that matches the lens on your helmet. Auto-On Lens Assembly 1 Reset/Auto-On Button 2 Variable Shade Control 3 Sensitivity/Grind Mode Control 4 Lens Delay Control 5 Low Battery Indicator Manual-On Lens Assembly 1 On/Auto-Off Button 2 Low Battery Indicator 3 Variable Shade Control 4 Sensitivity Control 5 Lens Delay Control 1 2 3 4 5 1 2 3 4 5 804 090 Page 3 Reset/Auto-On Button (Auto.On Lens Assembly) Press the Reset button to check lens operation. If working properly, the lens will automatically darken twice and then return to the light state. The lens will Auto Off (light state . No. 4) 15 . 20 minutes after the last arc. It is not necessary to press the Reset button to resume welding. On/Auto-Off Button (Manual-On Lens Assembly) Locate the ON button and press ON to weld, the lens will automatically darken twice and then return to the light state, the helmet is then ready to weld. Note: The lens will A...