Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
The Installation/Troubleshooting helps you to easily configure the camera. • Operating Instructions (Included on the Setup CD-ROM) Operating Instructions explains about operations, settings, features and the cleaning method when using the camera. Abbreviations • UPnP is the abbreviation for “Universal Plug and Play”. • "Network Camera" is called "Camera" in this Installation/Troubleshooting. Trademarks • Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. • Screen shots reprinted with permission from Microsoft Corporation. • All other trademarks identified herein are the property of their respective owners. System Requirements for your PC Your PC (Personal Computer) and network must meet the following technical specifications for the camera to work properly. For IPv4 Connection Item Description Operating System Microsoft® Windows® XP, Microsoft® Windows® 2000 Microsoft® Windows® Me, Microsoft® Windows® 98SE CPU • For viewing single camera Pentium® III (800 MHz or greater is recommended.) • For viewing multiple cameras Pentium 4 (1.8 GHz or greater is recommended.) Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP) Interface 10/100 Mbps network card installed Web Browser Internet Explorer 6.0 or later (Not included on the Setup CDROM) For IPv6 Connection Item Description Operating System Microsoft® Windows® XP Service Pack 1 or later CPU • For viewing single camera Pentium III (800 MHz or greater is recommended.) • For viewing multiple cameras Pentium 4 (1.8 GHz or greater is recommended.) Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP) Interface 10/100 Mbps network card installed Web Browser Internet Explorer 6.0 or later (Not included on the Setup CDROM) Note See Panasonic Network Camera support website at for details about network environment. What is IPv6? • IPv6 is short for "Internet Protocol Version 6". • IPv6 was created to address the additional IP addresses that will be needed as the Internet continues to expand. • IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number of years during a transition period. • Though most ISPs (Internet Service Providers) do not yet support IPv6, many local networks already use it. When your ISP supports IPv6, your Panasonic Network Camera will be ready! • For more information you wish to visit Table of Contents 1 Before Using ................................................................ 6 1.1 IMPORTANT SAFETY INSTRUCTIONS ...................................... 6 1.1.1 FCC and Other Information ...................................................................... 7 1.1.2 Security Cautions ..................................................................................... 8 1.1.3 User Name and Password Protection ....................................................... 8 1.2 Included Items .............................................................................. 9 1.3 Camera Feature Locations ......................................................... 10 1.3.1 Front View ............................................................................................... 10 1.3.2 Rear View ............................................................................................... 11 1.3.3 Bottom View ............................................................................................ 11 1.4 Connecting the Camera to Your Router ...................................... 12 1.5 Connecting the Camera to Your TV ............................................. 14 1.6 Setting up the Camera to View on the LAN ................................ 15 1.7 Setting up Internet Access to the Camera .................................. 19 1.8 Viewnetcam.com Service (IPv4/IPv6) ........................................ 23 1.9 Connecting the Camera to a Router Supporting UPnP™ (IPv4 Only) .................................................................................. 25 1.10 Connecting the Camera to a Router Not Supporting UPnP™ (IPv4 Only) .................................................................................. 26 1.11 Setting up the Camera Using the MAC Address on the Setup Program ...................................................................................... 27 1.12 Confirming the Camera Image ................................................... 30 1.13 Mounting ..................................................................................... 34 1.13.1 Mounting on the Table ............................................................................ 34 1.13.2 Mountin...