Оценок - 7, средний балл: 4.1
(
)
)
|
Фото и характеристики TRENDnet TV-IP110 |
Фрагмент инструкции
Before You Start .................................................................................1 2. Hardware Installation ......................................................................... 3 3. Configure the Internet Camera ..........................................................4 Troubleshooting ........................................................................................ 8 Version 10.19.2007 1. Before You Start 1. Before You Start Package Contents ?TV-IP110/TV-IP110W ?Quick Installation Guide ?Utility CD-ROM ?AC Power Adapter (5V, 2.5A) ?1 x 2dBi Detachable Antenna (TV-IP110W) ?1.8m (5.9 ft) Cat.5 Fast Ethernet cable System Requirements ? 10/100Mbps Ethernet ? CPU: Pentium 4 1GHz processor or above ? Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista) ? VGA Resolution: 800 x 600 or above ? Web Brower: Internet Explorer (6.0 or higher) ? Windows 2000/XP/Vista English 1 Application Modem Internet Camera Server (TV-IP110) Cable/DSL 4-Port Broadband Router (TW100-S4W1CA) Notebook with PC Card Internet (TE100-PCBUSR) 10/100Mbps Wireless Internet Camera Server (TV-IP110W) Wireless G Firewall Router (TEW-432BRP) Internet Notebook with Modem Wireless G PC Card (TEW-421PC) 54Mbps English 2 2. Hardware Installation 1. Attach the Antenna. (TV-IP110W) 3. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 4. Verify the Power and Link LEDs are on. (TV-IP110W shown here) 2. Connect a RJ-45 network cable from a Switch/Router to theEthernet port of the Internet Camera. 2. Hardware Installation 1. Attach the Antenna. (TV-IP110W) 3. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 4. Verify the Power and Link LEDs are on. (TV-IP110W shown here) 2. Connect a RJ-45 network cable from a Switch/Router to theEthernet port of the Internet Camera. English 3 3. Configure the Internet Camera Note: It is recommended that you configure the Internet Camera from a wired computer. Since the Internet Camera's default IP address is 192.168.10.30, make sure no other network devices are assigned an IP address of 192.168.10.30. 1. Insert the Utility CD-ROM into your CD-ROM drive and then click IP Setup. 2. Follow the Installation Wizard instructions and then click Close. 3. Go to Start -> Programs -> TRENDnet -> IPSetup and click IPSetup. 4. Select the Internet Camera and click Change IP. English 4 English 5 6. Click OK and wait 30 seconds. 5. Configure the IP address to be in the same subnet as your network, type in the Administrator ID and Password and click Change. By default: ID: admin Password: admin 7. Click OK. 8. Double click the Internet Camera to access the browser configuration. English 5 6. Click OK and wait 30 seconds. 5. Configure the IP address to be in the same subnet as your network, type in the Administrator ID and Password and click Change. By default: ID: admin Password: admin 7. Click OK. 8. Double click the Internet Camera to access the browser configuration. 11. Click Install. 9. Enter the User name and Password, and then click OK. User Name: admin Password: admin 10. Right click and select Install Active X Control. 12. Click Network and then click Wireless. Configure your wireless settings to match your wireless network's settings and then click Apply (Enable/Enter the WEP/WPA key when your wireless network is encrypted. Contact your network administrator for more information). (TV-IP110W only) English 6 11. Click Install. 9. Enter the User name and Password, and then click OK. User Name: admin Password: admin 10. Right click and select Install Active X Control. 12. Click Network and then click Wireless. Configure your wireless settings to match your wireless network's settings and then click Apply (Enable/Enter the WEP/WPA key when your wireless network is encrypted. Contact your network administrator for more information). (TV-IP110W only) English 6 13. Disconnect the RJ-45 cable and unplug the power. Then plug the power back in (TV-IP110W). Note: The TV-IP110W will not work wirelessly until you disconnect the Ethernet cable from the back of the camera. 14. Verify the Power and Link LEDs are on. 15. Click Live View. Your installation is now complete. Note: For detailed information regarding the TV-IP110/ TV-IP 110W configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at English 7 Register Your ProductTo ensure the highest level of customer service and support, please take a moment to register your product Online at: Thank you for choosing TRENDnet Troubleshooting Q1: How do I configure TCP/IP settings on my computer? 1. Go into the Control Panel and double-click the Network Connections icon, and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Use the following IP address, a...