Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Speak to your local Service Centre. The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm. You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. To attach the seal to the rabbet • Clean the rabbet in the work surface. • Bond the seal stripe supplied on the upper surface of the rabbet along the edges of the cut out section. • Cut the seal stripe into four pieces in relation to the length of the edges of the rabbet. • For the four corners of the rabbet the ends of the seal stripes must be cut into mitres. Do not bond the ends over one another. • Bond the seal stripe flush into the corner of the rabbet. Make sure that no silicon compound can get below the glass ceramic when grouting. • Do not extend the tapes. Assembly min. 50mm min. 500mm min. 50mm min. 5mm Installation instructions 7 514+1mm 490+1mm 560+1mm R10mm R5mm 12mm 7mm 584+1mm min. 600mm min. 38 mm min. 5 mm min. 25 mm min. 20 mm min. 5 mm If you use a protection box (the additional accessory1)), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. 1) The protection box accessory may not be available in some countries. Please contact your local supplier. 8 8 Product description PRODUCT DESCRIPTION General overview 210mm180mm180mm145mm12453 Control panel layout 1 2 3 4 5 Induction cooking zone 1800 W, with Power function 2800 W (minimum cookware diameter =145mm). Induction cooking zone 1800 W, with Power function 2800 W (minimum cookware diameter =145mm). Induction cooking zone 1400 W, with Power function 2500 W (minimum cookware diameter =125mm). Control panel Induction cooking zone 2300 W, with Power function 3700 W (minimum cookware diameter =180mm). 51 2 3 4 10 89 7 6 Use the sensor fields to operate the appliance The displays, indicators and sounds tell which function operate. sensor field function 1 It activates and deactivates the appliance. 2 It locks/unlocks the control panel. 3 cooking zones' indicators of timer It shows for which cooking zone you set the time. 4the timer display It shows the time in minutes. 5It activates the Power function. 6a heat setting display It shows the heat setting. 7a control bar To set the heat setting. 8 / It increases or decreases the time. 9It selects the cooking zone. Operating instructions 9 sensor field function 10It activates and deactivates STOP+GO Heat setting displays The cooking zone operates. - Display Description The cooking zone is deactivated. The function operates. The Automatic Heat Up function operates. Power function operates. There is a malfunction. + digit OptiHeat Control (3 step Residual heat indicator) : continue cook / stay warm / residual heat. / / Lock/The Child Safety functions operates. Not correct cookware or too small or no cookware on the cooking zone. The Automatic Switch Off function operates. OptiHeat Control (3 step Residual heat indicator) WARNING! \ \ The risk of burns from residual heat! OptiHeat Control shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. OPERATING INSTRUCTIONS Activation and deactivation Touch for 1 second to activate or deactivate the appliance. Automatic Switch Off The function stops the hob automatically if: • All cooking zones are deactivated. • You do not set the heat setting after you activate the appliance. • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove the object or clean the control panel. • The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the hob again, the cooking zone must be cool. 10 10 Operating instructions • You use not correct cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • You do not deactivate a cooking zone or change the heat setting. After some time, comes on and the appliance deactivates. See the table. The times of Automatic Switch Off Heat setting - - - - The cooking zone deactivates after 6 hours 5 hours 4 hours 1.5 hours The heat setting Touch the control bar at the heat setting. Change to the left or the right, if it is necessary. Do not release before you have a correct heat setting. The display shows the heat setting. Automatic Heat Up 1 2 3 4 5 6 7 8 9 10 11 12 0 1234567891011121314 You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the illustration), and then decreases to the necessary heat setting. To start the Automatic Heat Up funct...
Эта инструкция также подходит к моделям:Варочные панели - HK654200IB (1.16 mb)
Варочные панели - HK654200IB (1.16 mb)
Варочные панели - HK654200IB (1.16 mb)