Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To obtain maximum power with the Powerboost Function, place the cookware in the centre of the flexible zone when used as a single hotplate. On hobs with more than one flexible zone, it is not recommended to use several zones at the same time for a single pan. Consisting of two independent zones The flexible zone can be used normally as two independent hotplates. How to activate See “adjusting the hotplate“ section. As one hotplate To use the entire hotplate with all individual zones. How to activate The hob must be switched on. 1. Select one of the two hotplates in the flexible zone and set the power level. 2. Press the asymbol. The indicator lights up. The flexible zone has been activated. Changing the power level Change the desired power level in the programming zone. To add more cookware Select the hotplate in the flexible zone and then press the a symbol to detect the cookware. The previously selected power level is maintained. Note: If the pan on the hotplate that is switched on is moved or removed, the hob will perform an automatic search and the previously selected power level will be maintained. To deactivate Set it to ‹ in the programming zone. Return to using two hotplates Select one of the two hotplates of the flexible zone and set to ‹. Note: When a hob is switched off and later switched on again, the flexible zone will again be used as two hotplates. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childproof lock The hob should be turned off. To activate: press the symbol D for approximately 4 seconds. The indicator next to the symbol D lights up for 10 seconds. The hob is locked. To deactivate: press the symbol D for approximately 4 seconds. The lock is now deactivated. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Restrictions when using This function may be used for all hotplates, provided that the other hotplate in the same group is not switched on (see figure). Otherwise, › and the power level will flash on the selected hotplate display; the previously selected power level will then be automatically set, without activating the function. .................................... Note: The greatest amount of power supplied in the flexible zone is obtained by placing a pan in the centre of the zone, as indicated in the Flexible zone chapter. How to activate 1. Select a hotplate. 2. Press the boost G symbol. The › indicator lights up. The Powerboost function will have been activated. How to deactivate 1. Select a hotplate. 2. Press the boost G symbol. The › indicator will no longer be displayed and the hotplate will return to the power level S. The Powerboost function will have been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically The hotplate turns off automatically once the selected time has elapsed. Programming the cooking time. The hob must be switched on: 1. Select the required hotplate and power level. 2. Press the 0 symbol. The U indicator on the hotplate lights up. ‹‹ is displayed on the time program function display. 3. Press the + or -symbol. The basic setting appears: + symbol: 30 minutes. -symbol: 10 minutes. .. .. 4. Press the + or -symbol until the required cooking time appears. After a few seconds, the cooking time begins to count down. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Changing or cancelling the time Select the hotplate . Press the 0 symbol and change the cooking time with the + or -symbols, or set to ‹‹. Once the time has elapsed The hotplate switches off. A beep sounds and in the time program function display ‹‹ appears for 10 seconds. The U indicator on the hotplate lights up. Pressing the 0 symbol turns off the indicators and stops the beeping. Notes ¦ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. The timer can be sele...
Эта инструкция также подходит к моделям:Варочные панели - PIN651B17E/01 (529.44 kb)