Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The ‚symbol lights up briefly. The lock is released. Note: When the childproof lock is switched on, the symbol for the 3 timer is not locked. Automatic childproof lock This function automatically activates the childproof lock every time you switch the teppanyaki off. Switching on and off You can find out how to switch the automatic childproof lock on and off in the Basic settings section. Automatic time limit If the appliance is in use for a prolonged period without the The heat is interrupted. ” and ‰ flash alternately in the display. setting being changed, the automatic time limit is activated. The display goes out when you touch any control. You can Depending on the temperature set, the appliance may be reset the temperature. operated for between 2 and 4 hours before the automatic time limit is activated. Tips and tricks ¦ When the heating up light goes off, place the food on the appliance. This also applies when raising the temperature to fry a second item which requires a higher setting. ¦ Press the pieces of meat, poultry or fish flat onto the frying surface using the spatula. Only turn the meat, when it comes away from the surface easily, in order to protect the structure of the meat. Damaging the structure can cause juices to escape and results in the meat drying out. ¦ Keep the pieces of meat, poultry or fish apart so that they do not draw any liquid. ¦ Avoid pricking or cutting meat before or during frying, in order to retain meat juices. ¦ Do not salt the food before frying, to prevent liquid and soluble nutrients from escaping. ¦ Turn fish fillets in flour before frying. The fish will be easier to turn. ¦ Turn fish fillets only once if possible. Place fish onto the appliance with the skin facing downward. ¦ Use oil and fat that is suitable for frying, for example plant oil or concentrated butter. Timer The timer can be used as a kitchen timer. The timer does not switch the Teppan Yaki on or off. With the timer, you can set a time up to 99 minutes. You can also use the timer when the Teppan Yaki is switched off. Setting the timer 1. Touch the 3 symbol until S and ‹‹ light up in the timer display. 2. Set the required time on the settings range using the @and Asymbols. 3. Touch the @symbol. „‹ lights up in the timer display. Or: Touch the Asymbol. ‚‹ lights up in the timer display. 4. Touch the @symbol. The timer display is increased in increments of 1 minute. 5. Touch the Asymbol. The timer display is decreased in increments of 1 minute. A signal sounds once the time has elapsed. ‹‹ lights up in the timer display and the S symbol flashes. The signal and the display switch off after approx. 1 minute. You can change the duration of the signal in the basic settings; see section Basic settings. Correcting the timer 1. Touch the 3 symbol. 2. Set the required time on the settings range using the @and Asymbols. Basic settings Your appliance has various basic settings. You can adapt these settings to suit your own needs. Display Function ™‚ Automatic childproof lock ‹ Switched off.* ‚ Switched on. ™. Audible signal ‹ The confirmation signal and operating error signal are switched off. ‚ Only the operating error signal is switched on. . The confirmation signal and operating error signal are switched on.* ™‡ Duration of the timer end signal ‚ 10 seconds . 30 seconds „ 1 minute* ™. Switching off the rear heating zones ‹ When the appliance is switched on, both heating zones are on.* ‚ When the appliance is switched on, only the front heating zone is on. . When the appliance is switched on, the previous setting is retained. ™‹ Resetting to the basic setting ‹ All changed settings are saved. ‚ All settings are reset to the basic settings. *Basic setting Changing the basic settings The teppanyaki must be switched off. 1. Switch on the teppanyaki. 2. Within the next 10 seconds, touch the 7symbol for 4 seconds. ™ and ‚ flash alternately in the right-hand display; ‹ lights up in the left-hand display. 3. Touch the 7symbol repeatedly until the required display flashes on the right-hand display. 4. Set the required value on the settings range using the @and Asymbols. 5. Touch the 7symbol for at least 3 seconds. The setting has been saved. Switching off without saving To exit the basic setting, switch the Teppan Yaki off with the main switch. Changes are not saved. Care and cleaning In this chapter you will find tips on how to maintain and clean your appliance correctly. : Risk of electric shock! Do not use high pressure washers or steam cleaners to clean the appliance. : Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. : Risk of burns! When you add water or ice cubes to the hot grilling surface, it will spit and steam will form. Do not bend over the appliance. Keep a safe distance away. Cleaning the appliance Clean the appliance after each use once it has cooled down. Burnt-on residues can only be removed with difficulty. Remove large clumps of residue using...