Производитель: Bosch Размер: 625.83 kb Название файла: Язык инструкции:

Перейти к скачиванию

Programming the cooking time. The hob must be switched on: 1. Select the required hotplate and power level. 2. Press the 0 symbol. The U indicator on the hotplate lights up. ‹‹ is displayed on the time program function display. 3. Press the + or -symbol. The basic setting appears: + symbol: 30 minutes. -symbol: 10 minutes. ........ 4. Press the + or -symbol until the required cooking time appears. After a few seconds, the cooking time begins to count down. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Changing or cancelling the time Select the hotplate . Press the 0 symbol and change the cooking time with the + or -symbols, or set to ‹‹. Once the time has elapsed The hotplate switches off. A beep sounds and in the time program function display ‹‹ appears for 10 seconds. The U indicator on the hotplate lights up. Pressing the 0 symbol turns off the indicators and stops the beeping. Notes ¦ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. The timer can be selected in two different ways: ¦ If you have selected the hotplate: press the 0 symbol twice. ¦ If you have not selected the hotplate: press the 0 symbol. The U indicator next to the W symbol lights up. ‹‹ is displayed on the time program function display. 2. Press the + or -symbol. The basic setting appears. + symbol: 10 minutes. -symbol: 5 minutes. 3. Set the desired time using the + or -symbols. After a few seconds, the time will start to elapse. Changing or cancelling the time Press the 0 symbol various times until the U indicator next to the W symbol lights up. Change the time or set to ‹‹ with the + or -symbols. Once the time has elapsed A warning signal sounds. ‹‹ is displayed on the time program function display. After 10 seconds the indicators turn off. Pressing the 0 symbol turns off the indicators and stops the beeping. Automatic time limitation If the hotplate remains in use for a long time and no changes are made in the settings, the automatic time limitation function is triggered. The hotplate stops heating. The ”, ‰ symbol and the residual heat indicator oe/• flash alternately in the display. The indicator goes out when any symbol is pressed. The hotplate can now be reset. When the automatic time function is used, it is governed by the selected power level (from 1 to 10 hours). Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™‚ Childproof lock ‹ Deactivated.* ‚ Activated. ™. Audible signals ‹ Confirmation and error signals deactivated. ‚ Only error signal activated. . Only confirmation signal activated. „ All signals activated.* ™† Automatic programming of cooking time. ‹ Switched off.* ‚-SS Automatic shut-off time. ™‡ Duration of the time program function warning signal ‚ 10 seconds*. . 30 seconds. „ 1 minute. ™. Power-Management function ‹ = Deactivated.* ‚ = 1,000 W. minimum power. ‚= 1,500 W. . = 2,000 W. etc. S or S. = maximum power of hob.** ™S Hotplate time selection ‹ Unlimited: the last hotplate programmed remains selected.* ‚ Limited: The hotplate will only remain selected for 10 seconds. ™‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings. *Factory settings **The maximum power of the hob depends on the configuration of the installation's connection current. To not exceed this maximum value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use as required. Accessing the basic settings 4. Then select the required setting using the + and -symbols. The hob should be turned off. 1. Turn on the hob. 2. Within the next 10 seconds, press the ‚symbol for 4 seconds. In the display, the settings ™ and ‚ light up alternately with ‹ as the default setting. 3. Press the ‚symbol several times until the required function appears. 5. Press the symbol ‚again for more than 4 seconds. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cool enough before attempting to clean it. Only use cleaning products specifically designed for hobs. Follow the instructions provided on the packaging. ...

Эта инструкция также подходит к моделям:
Варочные панели - EH645BE68X/01 (625.83 kb)

Скачать инструкцию

Чтобы скачать, введите 2 цифры: