Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
flash alternately. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™ ‚ Childproof lock ‹ Off. * ‚ Activated. ™. Sound signals ‹ )Confirmation beep and error signal disconnected. ‚ Only error signal connected. . Confirmation beep and error signal connected. * ™† Automatic timer. ‹ Switched off. * ‚ - SS Automatic shut- off time ™‡ Duration of the time program function warning signal ‚ 10 seconds. . 30 seconds. „ 1 minute. ™. Power- Management function ‹ = Deactivated. * ‚ = 1,000 W. minimum power. ‚ = 1,500 W. . = 2,000 W. etc. S or S. = maximum power of hob. ** ™‹ Return to basic settings ‹ Personal settings. * ‚ Return to factory settings. *Factory settings * * The maximum power of the hob depends on the configuration of the installation's connection current. To not exceed this maximum value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use as required. To access the basic settings The hob must be turned off. 1. Switch on the hob. 2. Within the next 10 seconds, press the‚ symbol and hold for 4 seconds. ™‚ is displayed on the left of the screen and ‹ on the right. 3. Press the ‚ symbol several times until the indicator for the 5. Press the ‚ symbol again and hold for more than 4 required function appears. seconds. 4. Then select the required setting using the + and - symbols. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cold enough before attempting to clean it. Only use cleaning products specifically designed for glass- ceramic hobs. Follow the instructions provided on the packaging. Do not use: ¦ Abrasive products ¦ heavy-duty cleaners, like oven sprays and stain removers ¦ Pads that may scratch ¦ High- pressure or steam cleaners Glass scraper Remove dried- on food remains using a glass scraper. 1. Release the scraper safety catch 2. Use the blade to clean the hob surface Do not attempt to clean the hob surface with the base of the scraper. This could result in scratching. a= Risk of injury! ! The blade is extremely sharp. Risk of cuts. Protect the blade when not in use. Replace the blade immediately when any imperfections are found. Care of the appliance Apply an additive to protect and preserve the hob. Follow the advice and warnings provided with the product. Hob frame In order to avoid damage to the hob frame, follow the indications below: ¦ Use only slightly soapy hot water ¦ Do not use sharp or abrasive products ¦ Do not use a glass scraper Fixing malfunctions Malfunctions are commonly due to small details. Before calling the Technical Assistance Service, you should consider the following advice and warnings. Indicator Malfunction Solution none The electric power supply has been interrupted. Use other electrical appliances to check whether there has been a power cut. The appliance has not been correctly connected according to the connection diagram. Check that the appliance has been connected correctly according to the connection diagram. Electronic system malfunction. If the above checks do not resolve the malfunction, contact the Technical Assistance Service. “ flashes The control panel is damp or an object is resting on it. Dry the control panel area or remove the object. “§ + number / s + number / . + number / Electronic system malfunction. Turn the hob off from the mains. Wait 30 seconds or so and switch it back on.* * If the indication persists, call the Technical Assistance Service. Do not rest hot pans on the control panel. Indicator Malfunction Solution ”‹ / ”S There is an internal error in the operation. Turn the hob off from the mains. Wait 30 seconds or so and switch it back on. * ” . The electronic system has overheated and Wait for the electronic system to cool down. Then push any symbol the corresponding hotplate has been on the hob. * switched off. ” … The electronic system has overheated and all the hotplates have been switched off. ” ‰ The hotplate has been working non-stop The automatic time stop has been activated. Press any symbol on the too long at a high power level. control panel. The indicator goes out. The hob may now be switched back on. —‚ Incorrect supply voltage, outside normal Please contact the local electricity board. operating limits. —./ — „ The hotplate has overheated and has Wait until the electronic system has cooled down sufficiently before switched off in order to protect its cooking switching the hotplate back on. surface. * If the indication persists, call the Technical Assistance Service. Do not rest hot pans on the control panel. Normal...
Эта инструкция также подходит к моделям:Варочные панели - T43E20N1/01 (1.98 mb)