Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Dual-circuit hotplate Use the twist knob to select the hotplate, touch the . or e symbol . Extended cooking zone Use the twist knob to select the hotplate, touch the . or e symbol When the hotplate is activated: the corresponding indicator lights up. Residual heat indicator The hob has a two-stage residual heat indicator for each hotplate. If • appears in the display the hob is still hot. It may be used, for example, to keep a small meal warm or to melt cooking chocolate. As the hotplate cools down further, the display changes to oe. The display remains lit until the hotplate has cooled sufficiently. Twistpad with twist knob The twistpad is the area in which you can select the hotplates and set heat settings using the twist knob. The twist knob automatically centres itself in the twistpad. The twist knob is magnetic and is placed on the twistpad. Tapping the twist knob where there is a marking activates the relevant hotplate. Turning the twist knob sets the heat setting. Removing the twist knob You can remove the touch knob. This makes cleaning easier. You can also remove the twist knob while the hotplate is in operation. All the hotplates switch off after 3 seconds. m Risk of fire! If you place a metal object on the twistpad within 3 seconds, the hob may continue to heat up. For this reason, always switch off the hob using the main switch. Storing the twist knob The twist knob contains a strong magnet. Keep the twist knob away from magnetic data carriers, such as video cassettes, diskettes, credit cards or cards with magnetic strips. The data these contain could otherwise be wiped. They can also cause interference in television sets and monitors. m Hazard due to magnetism! For wearers of electronic implants, e.g. pacemakers or insulin pumps. Implants could be affected by magnetic fields. You must therefore never carry the twist knob in a pocket in your clothing. They must be kept at least 10 cm from pacemakers. Note: The twist knob is magnetic. Metal particles which stick to the underside can scratch the ceramic hob top. Always wipe the twist knob thoroughly. Operation without the twist knob If you have misplaced the twist knob, you can operate the hob without it: 1. Switch on the hob using the main switch. 2. Within the next 5 seconds, simultaneously touch the L and 3 symbols. A signal sounds. 3. Touch the "symbol repeatedly until the display for the desired hotplate lights up. 4. Touch the L symbol repeatedly until the desired heat setting appears on the heat setting display. The hotplate is switched on. Notes ¦ The timer function can be activated in the usual way. The cooking time must be set with the L symbol. ¦ The automatic zone control functions as usual. ¦ You can place the twist knob back on the twistpad at any time. Setting the hob This section informs you how to set the hotplates. The table shows heat settings and cooking times for various meals. Switching the hob on and off The main switch is used to switch the hob on and off. To swi...
Эта инструкция также подходит к моделям:Варочные панели - T13T40N0/01 (427.14 kb)
Варочные панели - T13T40N0/02 (427.14 kb)
Варочные панели - T14T30N0/01 (427.14 kb)
Варочные панели - T14T40N0/01 (427.14 kb)