Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Risk of injuries! ¦ Pans which are damaged, are not the right size, hang over the edge of the hob or are not positioned correctly can cause serious injuries. Follow the advice and warnings provided relating to the cooking pans. ¦ In the event of a malfunction, turn off the appliance’s gas and electricity supply. For repairs, call our Technical Assistance Service. ¦ Do not tamper with the appliance's interior. If necessary, call our Technical Assistance Service. ¦ If one of the control knobs will not turn, do not force it. Call the Technical Assistance Service immediately so that they can repair or replace them. Risk of electric shock! ¦ Do not clean the appliance using steam cleaners. ¦ Cracks or breaks in the glass may carry an electrocution risk. Disconnect the fuse from the fuse box. Notify the Technical Assistance Service. Your new appliance Page 2 shows an overall view of your new appliance as well as the burner power. Accessories Depending on the model, the hob may include the following accessories. These can also be acquired from the Technical Assistance Service. Additional wok pan support Only for use on double and triple-flame wok burners with pans which are more than 26 cm in diameter, grill pans, earthenware casserole dishes, large pans with a round base, etc. The additional wok pan support should be used to prolong the appliance's useful life. Additional coffee maker support Only for use on the auxiliary burner with pans which are no more than 12 cm in diameter. Simmer Plate This accessory has been designed to reduce the level of heat at the lowest power setting. Place the accessory directly on the pan support with the cones facing upwards, never directly over the burner. Centre the pan over the accessory. Wok pan The wok pan diffuses intense heat uniformly, so that the food is cooked in less time and using less oil. Always follow the manufacturer's instructions when cooking with a wok pan. Code HEZ298114 Additional coffee maker support HEZ298105 Simmer Plate HEZ298103 Wok pan The manufacturer accepts no liability if these accessories are not used or are used incorrectly. Gas burners There are indications to show which burner each control knob It is essential to ensure that all the burner parts and pan operates. supports are correctly installed for the appliance to work correctly. Do not swap the burner caps around. 14 Note: The childproof lock will be automatically activated the first time the appliance is connected and when switching on the appliance again after a power failure or voltage drop. To deactivate the childproof lock, refer to the Childproof lock section. Switching on Switching on a burner: 1. Turn on the appliance with the main switch. The main switch indicator will be turned on. 2.Press and turn the desired burner control knob anticlockwise to the required setting. The flame will ignite automatically and the hotplate indicator light will come on after a few seconds. If the burner does not switch on, wait at least a minute until trying again. Note: If after pressing the main switch, no burner comes on, the appliance will automatically switch off after three minutes. Safety system All the hotplates have a security device (thermocouple). If the burner is switched off during operation (e.g. due to a draught), the appliance automatically switches on the hotplate again. If reignition is not successful (e.g. due to food remains on the burner), the supply of gas to this burner is cut off and the burner hotplate indicator flashes. Turn the control knob to 0 and check the section on Operating indicators and error messages. Switching off Switching off a burner: turn the control knob clockwise to the off setting. Switching off the hob: after finishing cooking, turn all the controls to setting 0 and turn off the appliance with the main switch. The main switch indicator will be turned off. Automatic off After six hours of operation, the appliance switches off automatically. Turn all control knobs to setting 0; the appliance can now be switched on again. Power levels The progressive control knobs can be used to control the power needed, from minimum to maximum power. For dual double-flame burners, the inner and outer flames can be controlled separately. The available power levels are as follows: Operating and residual heat indicator All the hotplates have an operating and residual heat indicator which comes on when the flame on the corresponding hotplate is lit. Once the hotplate is switched off, the residual heat indicator remains on indicating that the hotplate temperature is too high. Do not touch the hotplate while the indicator light is on. After a while the residual heat indicator will go off, indicating that the temperature of the hotplate has dropped and is no longer too high. Care must then be taken when touching the appliance to avoid burns, since the hotplate may not have completely cooled down. Protection against overheating The hob has an overheating protection system to protect the...