Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Bosch, модель PIR675N14E/20

Производитель: Bosch
Размер: 1.37 mb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста


К этому устройству также есть другие инструкции:

Фрагмент инструкции


The indicator - lights between the symbols Iand H. 2. Select the required hotplate using the Ior H symbol. The ‹ . ‹ indicator lights up. 3. Change the heat setting using the symbols 0 to 9. To deactivate Select the hotplate and press the 0 symbol. The hotplate switches off. Indicators When a hob is switched off and switched on again, the flexible zone returns to being one hotplate Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Turning on and off the childproof lock. The hob should be switched off. To turn on: press and hold the >D symbol for approx. 4 seconds. The D symbol lights up for 4 seconds. The hob is locked. To turn off: press and hold the > D symbol for approx. 4 seconds. The lock is now deactivated. Activating and deactivating the childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating See the “Basic Settings" section. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Use limitations This function may be used for all hotplates, provided that the other hotplate in the same group is not turned on. ( See figure) Otherwise, the display for the selected hotplate will flash › and S; then it will automatically set the power level S. In Group 2, the Powerboost function may be activated at the same time for all hotplates. ( see diagram) % . % . % . How to activate 1. Select a hotplate. 2. Press the boost G symbol. The function has been turned on. To deactivate 1. Select a hotplate. 2. Press the Gboost symbol. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically Enter the time period for the hotplate. The hotplate turns off automatically once the time has elapsed. How to program 1. Select the required hotplate and power level. 2. Press the 0 symbol twice. ‹‹ y __ light up on the time function program display. 3. In the next 10 seconds, program the required time using symbols 1 to 9. The cooking time starts to count. Once the time has elapsed The hotplate switches off once this time has elapsed. A beep is heard and ‹ . ‹ appears in the hotplate and the time programming function display shows ‹‹ for 10 seconds. When the 0 symbol is pressed, the displays turn off and the beep goes off. Changing or cancelling the time Select the hotplate and press the 0 symbol twice. The __ and r displays appear Change the cooking time using symbols 1 to 9 or press 0 to cancel the time. Notes ¦ If a cooking time has been programmed, the display always shows the time of this function. To check the cooking time remaining in a hotplate, select a hotplate and press the 0 symbol twice. ¦ If a time has been programmed for several hotplates, the time of the selected hotplate is always shown. ¦ Any cooking time can be programmed for up to 99 minutes. Automatic timer With this function you may select a cooking time for all hotplates. Once a hotplate is switched on, the selected time will begin to count down. The hotplate will automatically switch off when the cooking time has elapsed. Instructions on activating the timer are found in the chapter entitled " Basic settings" Note: The cooking time can be changed or cancelled for any hotplate: Press the 0 symbol several times until the $ indicator of the required hotplate lights up. Adjust the cooking time with symbols 1 to 9 or deactivate with the symbol 0. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the 0 symbol. The indicator U lights up. ‹‹ lights up in the time program function display. 2. Set the required time using symbols 1 to 9. The time starts again after a few seconds. Once the time has elapsed Changing or cancelling the time Once the time has elapsed, a beep will sound. ‹‹ and Uare Press the 0 symbol, the U indicator lights up. displayed in the time program function display. After pressing Change the time using the 1 to 9 symbols or press 0 to cancel. the 0 symbol, the indications turn off. Cleaning lock function Cleaning the control panel while the hob is on may change the Note: The lock does not affect the main switch. The hob may settings. be switched off when desired. In order to avoid this, the hob has a cleaning lock function. Press the >D symbol. A signal sounds. The control panel is locked for 35 seconds. The surface of the control panel can now be cleaned without risk of changing the settings. Automatic time limitation If the hotplate remains in use for a long time and no chang...

Эта инструкция также подходит к моделям:
Варочные панели - PIZ901N14E/20 (1.37 mb)
Варочные панели - PIZ975N14E/20 (1.37 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории