|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The previously selected power level is maintained. Note: If the pan on the hotplate that is switched on is moved or removed, the hob will perform an automatic search and the previously selected power level will be maintained. To deactivate Select the hotplate and press the 0 symbol. As two hotplates The flexible zone can be used as two independent hotplates. How to activate The hob must be switched on. 1. Select the flexible zone then press the A symbol. The indicator b lights up between the A and A symbols. 2. Select one of the hotplates in the flexible zone. The indicator ‹ . ‹ lights up. 3. Select the power level in the programming zone. How to deactivate Select the hotplate and press the 0 symbol. The hotplate switches off. Note: When a hob is switched off and switched on again, the flexible zone returns to being one single hotplate. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Turning on and off the childproof lock. The hob should be switched off. To turn on: press and hold the >D symbol for approx. 4 seconds. The D symbol lights up for 4 seconds. The hob is locked. To turn off: press and hold the > D symbol for approx. 4 seconds. The lock is now deactivated. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Restrictions when using This function may be used for all hotplates, provided that the other hotplate in the same group is not turned on. ( See figure) Otherwise, the › and S symbols will flash on the display of the selected hotplate; then the power level S is automatically set without the function being activated. . . . Note: The Powerboost function can be activated in the flexible zone when used as a single hotplate. In this case, place the pan in the centre as shown in the Flexible zone section. How to activate 1. Select a hotplate. 2. Press the boost G symbol. The › indicator lights up. The Powerboost function will have been activated. How to deactivate 1. Select a hotplate. 2. Press the boost G symbol. The › indicator will no longer be displayed and the hotplate will return to the power level S. The Powerboost function will have been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: 3. In the next 10 seconds, program the required time using symbols 1 to 9. ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically Enter the cooking time for the hotplate. The hotplate turns off automatically once the time has elapsed. How to program 1. Select the desired hotplate and power level. 2. Press the 0 symbol twice. ‹‹ y and __ lights up on the time program function indicator. The cooking time starts to count down. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Changing or cancelling the time Select the hotplate and press the 0 symbol twice. The _ _ and r displays appear Change the cooking time using symbols 1 to 9 or press 0 to cancel the time. Once the time has elapsed The hotplate switches off once this time has elapsed. A beep is heard and ‹ . ‹ appears in the hotplate and the time programming function display shows ‹‹ for 10 seconds. When the 0 symbol is pressed, the displays turn off and the beep goes off. Notes ¦ If a cooking time has been programmed, the display always shows the time of this function. To check the cooking time remaining in a hotplate, select a hotplate and press the 0 symbol twice. ¦ If a time has been programmed for several hotplates, the time of the selected hotplate is always shown. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the 0 symbol. The indicator U lights up. ‹‹ lights up in the time program function display. 2. Set the required time using symbols 1 to 9. The time starts again after a few seconds. Once the time has elapsed Once the time has elapsed, a beep will sound. ‹‹ and Uare displayed in the time program function display. After pressing the 0 symbol, the indications turn off. Changing or cancelling the time Press the 0 symbol, the U indicator lights up. Change the time using the 1 to 9 symbols or press 0 to cancel. Cleaning lock func...
Эта инструкция также подходит к моделям:Варочные панели - PIN875N17E/01 (1.33 mb)
Варочные панели - PIV675N17E/01 (1.33 mb)