1 Fig. 2 Fig. 3. Each control knob is marked to show which burner it controls. Fig. 1. Make sure all burner parts and pan supports are correctly installed in order for the appliance to work correctly. Fig. 2-3. Turning the 1. Press the control knob for the selected burner and turn it counterclockwise to the desired setting. appliance on 2. Use any type of lighter or flame (cigarette lighter, manually matches, etc.) and bring it close to the burner. Turning the appliance on automatically If your cooktop can be switched on automatically (ignition sparkers): 1. Press the control knob for the selected burner and turn it counterclockwise to the highest setting. While the control knob is pressed, sparks are produced on all burners. The flame will ignite (you may then release the control knob). 2. Turn the control knob to the desired setting. If the flame does not ignite, turn the control knob to the Off setting and repeat the above steps. This time, press and hold the control knob for a longer period of time (up to 10 seconds). Warning! If after 15 seconds the flame does not ignite, turn off the burner and open a nearby window or door. Wait at least one minute before trying to turn the burner on again. Safety system Depending on the model, your cooktop may have a safety system (thermocouple) that stops gas from flowing if the burners accidentally turn off. To ensure that this system is activated, turn on the burner as normal and, without releasing the knob, hold the control knob down firmly for 4 seconds after lighting the flame. Ignition sparker Thermocouple Turning off a burner Turn the corresponding control knob clockwise to the 0 setting. Output levels The progressive control knobs can be used to adjust the output level from lowest to highest. Setting U Control knob off High flame Low flame — Maximum output or aperture and power on .– Minimum output or aperture For dual double-flame burners, the inner and outer flames can be adjusted separately. The following output levels are available: Inner and outer flame at maximum output Outer flame at minimum output, inner flame at maximum output. Inner flame at maximum output. Inner flame at minimum output. Main switch/cooktop lock The cooktop may have a main switch that cuts off the main gas supply and turns off all the burners at the same time. This switch is very practical if there are children in the house or if for any reason all the burners must be turned off quickly. To lock the cooktop: Press the main switch. This turns off any burners that are on. The cooktop is locked. To unlock the cooktop: 1. Turn all the control knobs to the "off" position. 2. Press the main switch and turn it all the way clockwise. The main gas supply is turned on. You can now use your cooktop normally. Warnings It is normal to hear a soft whistling noise while the burner is operating. When it is first used, it is normal for the burner to give off a smell; this does not pose any risk and does not indicate a malfunction. The sm...

Эта инструкция также подходит к моделям:
Варочные панели - PCP615A90V/07 (2.72 mb)
Варочные панели - PCQ715A80V/01 (2.72 mb)
Варочные панели - PCQ715A80V/07 (2.72 mb)
Варочные панели - PCQ715A90V/01 (2.72 mb)