|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
When you are cleaning the pan supports, take care with the rubber rests, as they could come off and the pan support could scratch the glass next time you use it. After washing the pan supports, dry them completely before cooking with them again. Drops of water or damp patches on the surfaces when you begin cooking may cause deterioration of the enamel. Warnings and suggestions for using glass ceramic surfaces: cleaning and care DON’T Never use detergent powder, oven cleaning sprays or abrasive sponges, as they may scratch the glass ceramic surface. Never use sharp objects such as metal scourers or knives to remove the hardened remains of food from the surface. Never slide receptacles across the glass surface, as you may scratch it. In addition, try not to drop heavy or sharp objects on the glass. Never strike any part of the cooking hob. Grains of sand that may come from cleaning fruits and vegetables will scratch the glass surface. Melted sugar or foods with a high sugar content which has spilled onto the surface should be cleaned off immediately. DO To prolong the life of the glass, always clean with a soapy sponge, but only when the appliance has cooled down. Clean the surface of the heating element once it has cooled down, and every time you use it. Even small patches of food or dirt will burn when you switch the plate on again. Always use a special flat scraper for glass, taking special care not to scrape near the trim of the gas burners. We recommend taking regular care of this appliance. Owing to the high temperatures that the triple-flame burner ring cover has to withstand (as well as the stainless steel areas such as the plate rings, grease traps and the area around the burners, etc.), they will eventually become discoloured with time. Clean them each time you use them, with a product that is suitable for stainless steel. When you are cleaning the pan supports, take care with the rubber rests, as they could come off and the pan support could scratch the glass next time you use it. ATTENTION: CLEANING FOR VITRO-GRILL APPLIANCES If you work with or cook food directly on the countertop DO NOT CLEAN the counter with any toxic components, or use aluminium scouring pads. We recommend that you use a detergent with a non-solid base, that does not contain “powders” or have a sandy texture, and use a scraper to assist you in the cleaning. Home troubleshooting You don’t always need to call the technical assistance service. Very often, you can solve the problem on your own. The following table contains a few pieces of advice. Important note: Only personnel authorised by our Technical Service should carry out work on the functional gas and electrical system. What’s gone wrong........? Probable cause Solution ... if the general electrical -Defective fuse. -Check the fuse in the main system is malfunctioning? -The automatic fuse may have fused or the trip switch has tripped. fuse box and change it if necessary. -Check the main fuse box to see whether the automatic trip switch or a differential switch has tripped. ... if the electrical sparker -There may be food or cleaning -Dry the burner covers and doesn’t work? residue between the sparker and the burners. -The burners are wet. -The burner covers are not located correctly. -Make sure that the burner covers are correctly located. -Carefully clean the spaces between the sparker and the burners. sparkers carefully. ... if the flames on the burners are not uniform? -The different parts of the burner have been located incorrectly. -The grooves on the burners’ gas outlets are dirty. -Place the different pieces correctly. -Clean the grooves of the gas outlets of the burners. ... if the gas flow does not seem -The gas stop cock is turned -Turn on all stop cocks. normal, or no gas comes out? off. -If the gas is coming from a gas bottle, it may be empty. -Replace the gas bottle with a full one. ... if there is a smell of gas in -A gas tap has been left on. -Check to see if any gas taps the kitchen area? -There may be a leak at the connection between the pipe and the gas bottle. are on. -Make sure that the connection is airtight. ... if the safety valves on the different burners don’t work? -The control knob has not been pressed in for long enough. -Light the burner, and then keep the control knob pressed in a few seconds longer. -The grooves on the burners’ gas outlets are dirty. -Clean the grooves on the burners’ gas outlets. In the event that you do call our technical service, please supply the following code: E - NR FD This code can be found on the specifications plate of your appliance, located on the underside of your cooking hob. Conditions of guarantee The conditions of guarantee which apply to this appliance are those that have been established by the suppliers representing our company in the country where the appliance was purchased. If necessary, the salesperson who sold you the appliance will be happy to provide details on same. However, the guarantee is only v...
Эта инструкция также подходит к моделям:Варочные панели - PCD345DEU/09 (4.91 mb)
Варочные панели - PCD345FEU/01 (4.91 mb)
Варочные панели - PCH345DEU/09 (4.91 mb)
Варочные панели - PCH345DEU/10 (4.91 mb)