Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Risk of electric shock! Do not clean the appliance using steam cleaners. 5 Your new appliance Page 2 shows an overall view of your new appliance as well as the burner power. Accessories The following accessories can be purchased from the Technical Assistance Service: -------- Code The manufacturer accepts no liability if these accessories are not used or are used incorrectly. Gas burners Remove the plastic covering used to protect the stainless steel before using the appliance (depending on the model). If any traces of adhesive remain on the printed areas, remove them with a wet cloth. There are indications to show which burner each control knob operates. It is essential to ensure that all the burner parts and pan supports are correctly installed for the appliance to work correctly. Do not swap the burner caps around. Additional wok pan support Only for use on wok burners with pans with a round base. Using these pans may cause some temporary deformation of the grease drip tray. This is normal and does not affect the operation of the appliance. Additional coffee maker support Only for use on the auxiliary burner with pans which are no more than 12 cm in diameter. Simmer Plate This accessory has been designed to reduce the level of heat at the lowest power setting. Place the accessory directly on the pan support with the cones facing upwards, never directly over the burner. Centre the pan over the accessory. Simmer Cap Burner specially designed to cook at minimum power. In order to use it, remove the auxiliary burner and replace it with the Simmer Cap burner. Wok pan The wok pan diffuses intense heat uniformly, so that the food is cooked in less time and using less oil. Always follow the manufacturer's instructions when cooking with a wok pan. HEZ298108 Additional wok pan support: cast iron HEZ298110 Additional wok pan support: steel enamel HEZ298114 Additional coffee maker support HEZ298105 Simmer Plate HEZ298104 Simmer Cap HEZ298103 Wok pan S wit ch in g o n m a n u a lly 1. Press the chosen burner control knob and turn it anticlockwise to the required setting. 2. Use any type of lighter or flame (cigarette lighter, matches, etc. ) and bring it close to the burner. Switching on automatically If your hob can be switched on automatically ( ignition sparkers) : 1. Press the chosen burner control knob and turn it anticlockwise to the maximum power setting. While the control knob is still pressed down, sparks are produced on all burners. The flame ignites. 2. Release the control knob. 3. Turn the control knob to the required setting. If it does not come on, turn the control knob to the off setting and repeat the steps above. This time, press and hold the control knob for longer (up to 10 seconds) . : Risk of deflagration! If after 15 seconds the flame does not ignite, switch off the burner and open a nearby window or door. Wait at least one minute before trying to switch the burner back on. Safety system Depending on the model, your hob may have a saf...
Эта инструкция также подходит к моделям:Варочные панели - PBH615B80L/09 (2.38 mb)
Варочные панели - PBH615B80Y/09 (2.38 mb)
Варочные панели - PBH615B90E/12 (2.38 mb)
Варочные панели - PBH615B90E/14 (2.38 mb)