Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Limitation on use This function is available on all elements, provided that no other element in the same group is operating, (see picture) . If this is not the case, the › and S symbols will flash on the selected element display; then it will automatically set the power level S. . . . . Turning on SpeedBoost 1. Select an element. 2. Touch Boost. The letter › will light up in the element display. The function has been turned on. Turning off SpeedBoost 1. Select an element. 2. Touch the Boost touch key. The letter › will no longer be displayed and the element will return to heat levelS. The SpeedBoost function has been deactivated. Note: In certain circumstances, the function may be deactivated automatically to protect the internal electronic components of the cooktop. Cook time You can use the timer function to set a cook time for any element. The element will turn off automatically once the set time has elapsed. 9 CAUTION . When using the timer, always keep an eye on the cooktop and do not allow anything to boil over or burn. Boilovers can cause smoke and foods and oils may catch on fire if left on high temperature settings. . This function should not be used for long periods of time, especially at high heat settings. . Make sure the cooktop is turned off with the main power switch after each use. Setting the cook time 1. Select the desired element and power level. 2. Touch the Timer symbol. The ‹‹ , min and b indicators light up on the timer display. The indicator for the desired element lights up 3. Within the next 10 seconds, set the required time using the symbols 1 to 9. After a few seconds, the timer will start to count down. The last programmed cook time will appear in the display. Once the cook time has elapsed The element turnes off once the set cook time has elapsed. You will hear a beep. The indicator ‹ . ‹ appears in the element display and the timer display shows ‹‹ . Once you touch the Timer key, the indicators and the beep are turned off. Change cook time Select the element and touch the Timer key twice. Set the new cook time using the number keys 0 to 9. Cancelling cook time Select the desired element and touch the Timer symbol twice. The min, __ and rindicators light up. Then select 0 from the number keys until ‹‹ is displayed. Timer function with AutoChef ™ When you cook using AutoChef™, the programmed cook time begins to count down once the selected element reaches the set temperature. Notes . You can set a cook time of up to 99 minutes. . To program a cook time of less than 10 minutes, always select 0 first before you select the required value. . After a power outage, the timer function will be cancelled. Automatic timer With this function you may select a cook time for all elements. Once an element is turned on, the selected time will begin to count down. The element will automatically turn off when the cook time has elapsed. Instructions on activating the automatic timer are found in the chapter " Basic settings" . Note: The cook time can be changed or cancelled for any element: Touch the Timer key several times until the $ indicator of the required element lights up. Adjust the cook time with touch keys 1 to 9 or deactivate with 0. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off an element. Setting the time 1. Touch the Timer key. ‹‹ appears in the timer display. The __ , min and V indicators light up. 2. Set the required time using the number keys 0 to 9. After a few seconds, the __ indicator goes out and the programmed time starts to count down. Once the time has elapsed A beep sounds. ‹‹ and U indicators light up. Touch the Timer key. The indicators go out and the beep stops. Changing the time Touch the Timer key. The __ and V indicators light up. Change the time using the number keys 0 to 9. Clearing the time Touch the Timer key. The __ and V indicators light up. Touch the 0 key until ‹‹ appears on the timer display. The V indicator goes out. Notes . If the set time is not displayed, touch the Timer key several times until the U indicator lights up on the timer display. . The timer will be deactivated after a power outage. . The automatic off function for an element and the timer function can both be operated simultaneously. Child lock You can use the child lock to prevent children from accidentally turning the cooktop on. Turning the child lock on The cooktop must be turned off. Touch Clean Lock/ Child Lock until a beep sounds and the D indicator lights up. The cooktop is now locked. After some time, the D indicator will go out. Turning the child lock off Touch Clean Lock/ Child Lock until a beep sounds and the D indicator turns off. The child lock is now deactivated. The cooktop can be switched on. 9 CAUTION The child lock may be accidentally turned on and off due to: . water spilled during cleaning . food that has overflowed . objects being placed on the Clean ...
Эта инструкция также подходит к моделям:Варочные панели - NIT8065UC/20 (3.23 mb)
Варочные панели - NIT8065UC/21 (3.23 mb)