Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The cable insulation can be damaged. Glass ceramic cover Caution, risk of burns! Wait until the appliance has cooled down completely before placing the glass ceramic cover on the appliance. Do not switch on the appliance with the glass ceramic cover placed on it. Cleaning Switch off the appliance after use. Clean the appliance after every use when it has cooled down. Do not use high-pressure or steam jet cleaning devices. Repairs Incorrect repairs are dangerous. Risk of electric shock! Repairs must be carried out by one of our experienced after-sales engineers. If the appliance is damaged, switch off the corresponding household fuse. Call after-sales service. How to avoid damage Stainless-steel frying surface The stainless-steel frying surface is tough and smooth. However, the surface will show signs of use after some time, just like a good cast iron pan. This does not interfere with the use of the appliance. A slight yellowing of the stainless-steel frying surface is normal. Do not cut with knives on the stainless-steel frying surface, this might scratch the surface. Use the spatulas to turn food. Note: do not hit the frying surface with the spatula. This might leave marks on the surface. Hard or pointed objects Hard or pointed objects may cause damage if they fall onto the glass ceramic panel or the glass ceramic cover. Glass ceramic cover Wait until the appliance has cooled down completely before placing the glass ceramic cover on the appliance. Do not switch on the appliance with the glass ceramic cover placed on it. Do not use the glass ceramic cover as a surface for placing objects or for keeping things warm. Before first use Heat up the appliance Thoroughly clean the frying surface before using the appliance for the first time. Then heat up the appliance without any food placed on it at 240 °C for 30 minutes. This will eliminate any 'newness' smells. Your new appliance Your new appliance and its accessories are described in this section. This is your new teppan yaki Glass ceramic cover Frying surface Control panel Control panel Display for Display for residual heatk/H temperature preheating°C timer Control panel for Control panel for Control panel for main switchlselecting the temperaturetimer W rear heating zone off ukeeping warm setting < cleaning settingF Control panels When you touch a symbol, the respective function is activated. Note Always keep the control panels dry. Moisture reduces their effectiveness. Setting the teppan yaki Switching the teppan yaki on and off Switch the teppan yaki on and off using the main switch. To switch on: touch the lsymbol. The indicator above the main switch lights up. The teppan yaki is ready. To switch off: touch the lsymbol until the indicator above the main switch goes out. The teppan yaki is switched off. The residual heat indicator remains on until the teppan yaki has cooled down sufficiently. Note The teppan yaki switches off automatically if the temperature setting has been set to 0 for more than 20 seconds. Setting the temperature Set the required temperature on the control panel. The teppan yaki must be switched on by the main switch. 1. Set the temperature. Slide your finger along the control panel until the desired temperature appears on the display. 2. Wait until the appliance has heated up and a signal is sounded. The preheating symbol goes off. Now you can place the food on the frying surface. Residual heat indicator The teppan yaki has a two-stage residual heat indicator. If kappears on the display, the teppan yaki is still hot. As the teppan yaki cools down further, the display changes to h. The display remains lit until the teppan yaki has cooled down sufficiently. Only clean the teppan yakiwhen the residual heat indicator has changed from k to h. Keeping warm setting The teppan yaki must be switched on by the main switch. Select the keeping warm setting in the control panel. Do not keep warm large amounts of food. All the food should have contact with the frying surface, otherwise it might cool down. Do not keep food warm for a longer time as it will dry out. Switching the rear heating zone off When frying small amounts of food you can switch off the rear frying zone and use only the front half of the frying zone. You can use the rear frying zone to keep food warm. The teppan yaki must be switched on by the main switch. Touch the usymbol. The indicator above the symbol lights up. The rear frying zone is switched off. When switching on the appliance the next time, the chosen setting remains activated. You can change this option in the basic settings. Automatic time limit If the teppan yaki is in use for a long time without the setting being changed, the automatic time limit is activated. The appliance stops heating. F and 8flash alternately on the display. The display goes out when you touch any control panel. You can make new settings. When the time limit is activated, depends on the temperature selected. Cleaning setting On the cleaning settin...
Эта инструкция также подходит к моделям:Варочные панели - ET475MY11E/03 (293.45 kb)