|
Фрагмент инструкции
Never use sharp objects such as knives or wire wool to remove the remains of food that has become encrusted onto the surface. Do not use knives, scrapers or similar implements for cleaning the joins between the glass and the rims of the burners or the metal surrounds. Do not slide recipients over the glass as they may scratch it. Similarly, do not drop hard or sharp objects onto the glass. Avoid Knocking any part of the edge of the cooking plate. Grains of sand, which may, for example, come from cleaning vegetables, can scratch the glass surface. DOs Once the appliance is cold, clean it with a sponge and soapy water. Clean the surface of the heating elements once they have cooled down, each time they are used. Even small amounts of dirt burn when it is switched on again. The burners and pans support must be cleaned regulary to keep them clean. This is done by submerging them in soaply water and scrubbing them them with a non-metal brush to keep the holes and slits free from obstruction so they can give a perfect flame. Dry the burner covers whenever wet or damp. After cleaning and drying the burners, make sure that the covers are properly in position on the flame diffuser. If the coating on the electric plates has worn off through use, smear them with a few drops of oil or one of the maintenance products available on the market. The high temperatures suffered by the cover on the triple-flame burner ring and the stainless steel parts on your hob (plate rings, grease trays, area around burners, etc) may become discoloured over time. This is NORMAL. Clean them after use with a product suitable for stainless steel. After washing the pans support, dry them thoroughly before cooking with them again. The presence of droplets of water or dampness at the beginning of the cooking process may damage the enamel surface. Be careful with the feet on the metal grids when cleaning them; if they are detached, the grid may scratch the glass next time it is used. Troubleshooting It is not always necessary to call the Service Centre. In some cases, you may be able to solve the problem yourself. This table contains some useful information. Important information: Only authorised personnel from our Service Centre are qualified to work on the main gas and electric systems. What.s wrong Possible cause Solution ...if none of the electrical -Faulty fuse. -Check the fuse in the system works? -The automatic circuit breaker or mains differential has been triggered. main fuse box and -Check to see if the circuit breaker or a differential has been triggered in the mains replace it if it is faulty. supply box. ...if the electric ignition system -There may be food or cleaning -The gap between the spark does not work? product particles between the spark plugs and the burners. -The burners are wet. -The covers on the burners are not in the right position. -Dry the burner covers and spark plugs carefully. -Check that the covers have been put in the proper position. plug and the burn...
Эта инструкция также подходит к моделям:Варочные панели - EP626HB80E/18 (3.21 mb)
Варочные панели - EP626HB80E/19 (3.21 mb)
Варочные панели - EP626PB80E/01 (3.21 mb)
Варочные панели - EP626PB80E/18 (3.21 mb)