Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Варочные панели - EH675ME11E/20 (2.65 mb)
Варочные панели - EH675ME11E/20 (351.16 kb)
Фрагмент инструкции
# . # . To activate 1. Select the power level S. 2. Press the programming panel located above the @ › symbol. The function has been activated. To turn off Press the programming panel located above the @ › symbol. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turn off a hotplate automatically Enter the cooking time for the desired hotplate. The hotplate turns off automatically once the time has elapsed. Programming 1. Select the desired power level. 2. Press the 0 symbol. Thex indicator of the hotplate lights up. ‹‹ lights up in the time program function display. To select another hotplate, press the 0 symbol several times until the xindicator for the desired hotplate lights up. 3. Select the required cooking time in the programming panel. The possible previous setting is, from left to right 1, 2, 3, etc. , up to 10 minutes. Within the next 10 seconds, continue past the options in the programming panel until reaching the desired time. After a few seconds the cooking time begins to count down. Automatic programming If the previous setting from 1 to 5 is pressed in the programming panel, the cooking time is reduced by one minute, if it is held down the time is automatically reduced to one minute. If the previous setting from 6 to 10 is pressed in the programming panel , the cooking time is increased by one minute, if it is held down the time is automatically increased to 99 minutes. Once the time has elapsed The hotplate switches off. An audible signal sounds and ‹‹ appears in the time program function display for 10 seconds. The x indicator lights up. Pressing the 0 symbol turns off the indicators and stops the signal. Changing or cancelling the time Press the 0 symbol several times until the required x indicator lights up. Change the cooking time in the programming panel, or set to ‹‹ . Notes ¦ If a cooking time has been programmed in several zones, it can be set to display all time values. To do this, press the 0 symbol several times until the x indicator for the required hotplate lights up. ¦ Cooking times of up to 99 minutes can be programmed. Automatic timer With this function you may select a cooking time for all hotplates. Once a hotplate is switched on, the selected time will begin to count down. The hotplate will automatically switch off when the cooking time has elapsed. Instructions on activating the timer are found in the chapter entitled " Basic settings" . Note: The cooking time of a zone may be cancelled or changed: Press the 0 symbol several times until the required x indicator lights up. Change the cooking time in the programming panel, or set to ‹‹ . The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Once the time has elapsed A warning beep sounds. In the time program function display ‹‹ is shown, and the W indicator comes on. After 10 seconds the indicators turn off. Pressing the 0 symbol turns off the indicators and stops the beep. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the cooking time in the programming panel, or set to ‹‹ . Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. On the hotplate display, ” and ‰ selected power level ( from 1 to 10 hours) . flash alternately. Cleaning lock function Cleaning the control panel while the hob is on may change the Note: The lock does not affect the main switch. The hob may settings. be switched off when desired. In order to avoid this, the hob has a cleaning lock function. Press the # symbol. A signal sounds. The control panel is locked for 35 seconds. The surface of the control panel can now be cleaned without risk of changing the settings. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™ ‚ Childproof lock ‹ Deactivated. * ‚ Activated. ™ . Sound signals ‹ Confirmation beep and error signal deactivated. ‚ Only confirmation beep deactivated. . All signals activated. * ™ † Automatic timer ‹ Switched off. * ‚ - SS Automatic shut-off time. ™ ‡ Duration of the time program function warning signal ‚...
Эта инструкция также подходит к моделям:Варочные панели - EH679ME11/20 (2.15 mb)
Варочные панели - EH975ME11E/20 (2.15 mb)
Варочные панели - EH879ML11/21 (2.15 mb)