Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The flexible zone has been activated. 3. The power level lights up on the lower hotplate indicator. The flexible zone is switched on. Changing the power level Change the desired power level in the programming zone. Adding more cookware Select the hotplate in the flexible zone and then press the . symbol. The previously selected power level is maintained. Note: If the pan on the hotplate that is switched on is moved or removed, the hob will perform an automatic search and the previously selected power level will be maintained. To deactivate Set it to ‹ in the programming zone. Return to using two hotplates Select one of the two hotplates of the flexible zone and set to ‹ . Note: When a hob is switched off and later switched on again, the flexible zone will again be used as two hotplates. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childprooflock The hob should be turned off. To activate: press the symbol ‚ / $ for approximately 4 seconds. The indicator next to the symbol ‚ / $ lights up for 10 seconds. The hob is locked. To deactivate: press the symbol ‚ / $ for approximately 4 seconds. The lock is now deactivated. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Restrictions when using This function may be used for all hotplates, provided that the other hotplate in the same group is not turned on. ( See figure) Otherwise, the › and S symbols will flash on the display of the selected hotplate; then the power level S is automatically set without the function being activated. . . . Note: The Powerboost function can be activated in the flexible zone when used as a single hotplate. In this case, place the pan in the centre as shown in the Flexible zone section. To activate 1. Select a hotplate. 2. Press the › symbol. The › indicator lights up. The function should be activated. To deactivate 1. Select a hotplate. 2. Press the › symbol. The › indicator will no longer appear and the hotplate will return to the power level S. The function will be deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: 3. Within the next 10 seconds, select the desired cooking time in the programming zone. The possible default setting is, ¦ to automatically switch off a hotplate. from left to right: 1, 2, 3, etc. , up to 10 minutes. ¦ as a timer. Turning off a hotplate automatically The zone turns off automatically once the selected time has elapsed. Program the cooking time. The hob must be switched on: 1. Select the desired hotplate and power level. 2. Press the 0 symbol. The x indicator on the hotplate lights up. ‹‹ lights up in the time program function display. After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Automatic programming If the previous setting from 1 to 5 is pressed in the programming zone, the cooking time is reduced by one minute. If the previous setting from 6 to 10 is pressed in the programming zone, the cooking time is increased by one minute. Changing or cancelling the time Select the hotplate and then press the 0 symbol. Change the cooking time using the programming zone or set to ‹‹ in order to cancel the time. Once the time has elapsed The hotplate switches off. A warning signal sounds. The time program function lights up ‹‹ for 10 seconds in the display. When the 0 symbol is pressed, the indications turn off and the beeping stops. Notes ¦ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the time with the programming zone, or set to ‹‹ . Once the time has elapsed A warning signal sound...
Эта инструкция также подходит к моделям:Варочные панели - EH675FV17F/01 (2.14 mb)
Варочные панели - EH659FN17F/01 (2.14 mb)