Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Bosch, модель EH651FJ17E/01

Производитель: Bosch
Размер: 2.1 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


3. Within the next 10 seconds, select the desired cooking time in the programming zone. The possible default setting is, from left to right: 1, 2, 3, etc. , up to 10 minutes. After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Automatic programming If the previous setting from 1 to 5 is pressed in the programming zone, the cooking time is reduced by one minute. If the previous setting from 6 to 10 is pressed in the programming zone, the cooking time is increased by one minute. Changing or cancelling the time Select the hotplate and then press the 0 symbol. Change the cooking time using the programming zone or set to ‹‹ in order to cancel the time. Once the time has elapsed The hotplate switches off. A warning signal sounds. The time program function lights up ‹‹ for 10 seconds in the display. When the 0 symbol is pressed, the indications turn off and the beeping stops. Notes ¦ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the time with the programming zone, or set to ‹‹ . Once the time has elapsed A warning signal sounds. In the time program function display ‹‹ is shown, and the W indicator lights up. After 10 seconds the indicators turn off. When the 0 symbol is pressed, the indicators turn off and the beeping stops. Cleaning lock function Cleaning the control panel while the hob is switched on may change the settings. In order to avoid this, the hob has a cleaning lock function. Press the ‚ / $ symbol. A signal sounds. The control panel is locked for 35 seconds. The control panel surface can now be cleaned without the risk of changing the settings. Note: The lock does not affect the main switch. The hob may be turned off when desired. Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. The ” , ‰ symbol and the residual selected power level (from 1 to 10 hours) . heat indicator oe/ • flash alternately in the display. Displaying energy consumption This function displays total energy consumption for the time the The Basic Settings chapter provides information on activating hob has been switched on. this function. After switching off the hob, the consumption in kWh is displayed for 10 seconds. An example is shown in the image with a consumption of ‚ . ‹‰ kWh. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™ ‚ Childproof lock ‹ Deactivated. * ‚ Activated. ™ . Audible signals ‹ Confirmation and error signals deactivated. ‚ Only error signal activated. . Only confirmation signal activated. „ All signals activated. * ™ „ Display energy consumption ‹ Deactivated. * ‚ Activated. ™ † Automatic programming of cooking time. ‹ Switched off. * ‚ - SS Automatic shut-off time. ™ ‡ Duration of the time program function warning signal ‚ 10 seconds* . . 30 seconds. „ 1 minute. ™ . Power- Management function ‹ = Deactivated. * ‚ = 1,000 W. minimum power. ‚ = 1,500 W. . = 2,000 W. etc. S or S. = maximum power of the hob. ™ S Hotplate time selection ‹ Unlimited: the last hotplate programmed remains selected.* ‚ Limited: The hotplate will only remain selected for 10 seconds. ™ ‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings. *Factory settings Accessing the basic settings 3. Press the ' symbol several times until the desired function indicator appears. The hob should be turned off. 4. Then select the desired setting with the programming zone. 1. Switch on the hob using the main switch. 2. Within the next 10 seconds, press and hold the ' symbol for 4 seconds. In the display ™ and ‚ alternately light up and ‹ lights up as a default setting. 5. Press and hold the ' symbol again for more than 4seconds. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning...

Эта инструкция также подходит к моделям:
Варочные панели - EH651FL17E/01 (2.1 mb)
Варочные панели - EH659FL17E/01 (2.1 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории