Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Note: The cooking time of a plate may be cancelled or changed: Press the S symbol several times until the required x indicator lights up. Change the cooking time using the + or symbols, or set to ‹‹ . The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the S symbol several times until the S indicator lights up. ‹‹ appears in the time program function display. 2. Press the + or - symbol on the time program function. The basic setting will appear. + symbol: 10 minutes. - symbol: 5 minutes. 3. Set the time required using the + or - symbols. After a few seconds, the timer will start to count down. Once the time has elapsed Changing or cancelling the time A warning beep sounds. In the time program function display Press the S symbol several times until the S indicator lights ‹‹ is shown, and the W indicator comes on. After 10 seconds up. Change the time with the + or - symbols, or set to ‹‹ . the indicators turn off. Pressing the 0 symbol turns off the indicators and stops the beep. Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. On the hotplate display, ” and ‰ selected power level ( from 1 to 10 hours) . flash alternately. Basic settings The device has several basic settings. The settings can be adapted to the user's own needs. Indicator Function ™ ‚ Childproof lock ‹ Off. * ‚ On. ™ . Audible signals ‹ Most signals deactivated. ‚ Some signals deactivated. . All signals activated. * ™ † Automatic timer ‹ Switched off. * ‚ - SS Automatic shut- off time ™ ‡ Duration of the time program function warning signal ‚ 10 seconds* . . 30 seconds. „ 1 minute. ™ . Power- Management function ‹ = Deactivated. * ‚ = 1,000 W. minimum power. ‚ . = 1,500 W. . = 2,000 W. etc. S or S. = hob maximum power. ™ ‹ Return to default settings ‹ Personal settings. * ‚ Return to factory settings. * Factory settings To access the basic settings 4. Then select the required setting using the + and - symbols. The range must be turned off. 1. Switch on the range. 2. Within the following 10 seconds, press and hold the @ symbol for 4 seconds. ™‚ appears on the left side of the screen, and ‹ on the right. 3. Press the @ symbol several times until the indicator for the required function appears. 5. Push the @ symbol again and hold it for longer than 4 seconds. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the ...
Эта инструкция также подходит к моделям:Варочные панели - CA421350/02 (695.98 kb)
Варочные панели - CA421350X/01 (695.98 kb)
Варочные панели - CA421350X/02 (695.98 kb)
Варочные панели - CA422350/01 (695.98 kb)