Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
8 The different function of the hob When the hob is plugged in, all the indicator lights on the control panel light up for a few moments and there will be a short acoustic signal. Subsequently, the control panel switches off and, at this point, it will be possible to switch the hob on. Switching the hob on To switch on the hob, hold the button down for approximately 1 second. Cooking zone operation Each cooking zone is activated by means of a power adjustment device which is made up of a double key (+,-). Switching on a cooking zone • To switch on a cooking zone, set the desired power using the “+” and “-” keys. • To set the maximum temperature directly, briefly press the “-” key. Extendable cooking zone operation (if the hob comes with extendable cooking zones, see previous page) Double plate; a. set the desired power using the “+”and “-” keys (the innermost cooking zone is activated). b. press to enable/disable the outermost cooking area Switching off a cooking zone To switch off a cooking zone: • press thekeys “+”and “-” simultaneously: the power immediately returns to 0 and the cooking zone switches off; • or press the “-” key: the cooking zone’s power decreases progressively until it switches off. Switching off the hob Press ; the appliance switches off. If the hob’s controls have been locked (see previous paragraph), they will continue to be locked even after the hob has been switched back on. To switch the hob back on, it is necessary to unlock the controls. Locking the controls When the hob is operating, it is possible to block the controls to prevent the settings from being accidentally modified (children, cleaning operations, etc.). All you have to do is press ; the indicator light above the key lights up and the controls are locked. To modify the heating power or to interrupt the cooking process, it is necessary to unlock the controls: press for a few moments; the indicator light goes off and the controls unlock.. Programming the cooking time It is possible to programme all the cooking zones for a duration of between 1 and 99 minutes. Proceed as follows: • set the desired power on the plate/s using the “+”and “-” keys; • press the programming key until the indicator light in the position corresponding to the plate that you intend to programme lights up; • set the desired cooking time using the “+” and “-” keys ; • to confirm the programme a. press again b. wait approximately 10 seconds without pressing any other keys. The cooking time countdown begins immediately. The end of the programmed cooking time is indicated by means of an acoustic signal (this lasts for 10 seconds) and the cooking zone switches off. Repeat the above-mentioned procedure for each plate that you intend to programme. Programmed time display If one or more plates have been programmed, the display shows the time remaining for the plate which is closest to the end of the programmed time, indicating its position by means of the corresponding indicator light, which will be on. The indicator lights that correspond to the other programmed plates will flash. To show the time remaining for the other programmed plates, press repeatedly; the times of all the programmed plates will be shown in sequence, in an anti- clockwise direction, beginning from the front left one (only the corresponding indicator light will be on and the display flashes) Modification of programmed times Proceed as per the paragraph “Programmed time display” until the time of the plate you intend to modify is shown. Press the keys “+”and “-” to set the new time. Confirm by pressing or wait 10 seconds without pressing any keys. Cancelling a programme Display the time of the plate concerned (as in the paragraph “Programmed time display”) and press the keys “+” and “-” simultaneously; the programme is reset and you exit the programming mode. 9 Safety devices Acoustic signal Some anomalies, such as: • an object (pot, utensil, etc.) placed on the control area for more than 10 seconds, • a spillage on the control panel, • sustained pressure on one of the keys, etc. may cause the acoustic signal to go off. Remove the cause of the malfunction to stop the acoustic signal. The hob remains locked; all you have to do is unlock it to continues using it (the settings are saved). If the cause of the malfunction is not eliminated, the acoustic signal will carry on, while the hob will switch off for safety reasons. Safety switch The appliance comes with an automatic safety switch which goes off after a certain time interval (see table) in accordance with the selected power. During the safety in terruption, the letters “TI” and “ME” alternate on the display. for example: the right rear cooking zone is set on 5 and the front left cooking zone is set on 2.The right rear zone will switch off after 5 hours of operation, while the left front zone will switch off after 6 hours of operation. Inactivity If the plate is switched on but is not used for approximately 2 minutes, the control lock...