Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when itis in use. These items could melt or ignite. Pothold ers, towels or wood en spoons could catch fire if placed too close to the surface elements. Do not allow aluminum foil, or ANY material that can melt to make contact with the ceramic glass cooktop. If these items melt on the cooktop they will damage the ceramic cooktop. 10 Setting Surface Controls (cont'd) Operating the DUAL Surface Element The cooktops are equipped with a DUAL radiant surface element located at the right front cooktop position (Figures t & 2). indicator lights on the control panel at that position are used to indicate what portions of the dual radiant element will heat. The INNER light indicates that only the inner element will heat. The OUTER light indicates that both inner and outer Figure 1 Figure 2 elements will heat together. You may switch between these • 0 Outer 0 _ Outer different settings at any time during cooking. To Operate the Dual Surface Element: ® @ Inner t. Place correctly sized cookware on the radiant surface element. Figure 3 Figure 4 2. Touch and hold the (_w_,,) key pad until a beep sounds. The power indicator light will turn ON. Note: If no key pad is touched within 20 seconds the request to Power ON the cooktop will clear. • Outer 3. Touch and hold the (_o,/offl/pad for the dual element position until a beep is heard. The Inner display will show " --" Note: If no further pads are touched within 10 seconds the request to power the element ON will clear. 4. If the pan sensing feature is off, select the INNER (Figure 3) or OUTER (both elements) Figure 5 (Figure 4) to heat by pressing the E_..... t had _ Size _ once or twice (Figures 4 & 5 show indicator lights with OUTER and INNER elements selected). Note: If no element size is chosen when the dual element is turned ON, the control will default to the inner coil only. If the pan sensing feature is on, the element size key is disabled and the appropriate element size is automatically selected according to the pan size. 5. Touch HI pad once to turn ON the power level to HI (See Figure 5). Touch Lo V9 pad once for Lo. 6. Each touch of the HI pad will decrease or increase the power level from 9.5 through 3.0 by .5 increments. Simmer power levels between 3.0 and 1.2 will decrease or increase by .2 increments. Lo is the lowest power level available. Note: The power level may be adjusted at any time while the element is ON. 7. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area. 8. When cooking has been completed touch the (on/off'i/pad once to turn the element OFF and if no other surface element J is used touch the _WEj_ key p...
Эта инструкция также подходит к моделям:Варочные панели - 790.4281 (2.07 mb)
Варочные панели - 790.4282 (2.07 mb)
Варочные панели - 790.4281 (2.07 mb)
Варочные панели - 790.4281 (2.07 mb)