Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Any appliance or defective part replaced shall become the Company's property. · This guarantee is in addition to your statutory and other legal rights. Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours, in which case a premium will be charged. Exclusions This guarantee does not cover: • Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. • Costs incurred for calls to put right an appliance which is improperly installed or calls to appliance outside the United Kingdom. • Appliances found to be in use within a commercial or similar environment, plus those, which are the subject to rental agreements. • Products of Moffat manufacture which are not marketed by Moffat European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: • The guarantee starts from the date you first purchased your product. • The guarantee is for the same period and to the same extent for labour and parts as exist in the new country of use for this brand or range of products. • This guarantee relates to you and cannot be transferred to another user. • Your new home is within the European Community (EC) or European Free Trade Area. • The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household • The electrical supply complies with the specification given in the rating label. • The product is installed taking into account regulations in your new country. Before you move, please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0)3 44 62 22 22 Germany Nurnberg +49 (0)911 323 2600 Italy Pordenone +39 (0)1678 47053 Sweden Stockholm +46 (0)20 78 77 50 UK Slough +44 (0)1753 219898 16 INSTRUCTIONS FOR THE INSTALLER Safety Advice This cooker must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions. Location This cooker has been registered as a "Class X" appliance according to Fire Risk Regulations. Any adjacent cabinets or walls must not exceed the cooker's height. The cooker may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom or shower room. The minimum distance combustible material can be fitted above the cooker in line with the edges of the cooker is 420 mm. If it is fitted below 420 mm. a space of 50 mm. must be allowed from the edges of the cooker. The minimum distance combustible material can be fitted directly above the cooker is 700 mm. The adjacent furniture panels have to be heat proof or protected by such material. TECHNICAL DATA Dimensions Height Depth Width Oven Capacity Hob Front left heating plate (rapid) Back left heating plate (normal) Back right heating plate (normal) Front right heating plate (normal) Total Rating 900mm 500mm 600mm 1.942 Cu. ft 2000 W 1000 W 1500 W 1000 W 5500 W Oven Conventional (both elements) Top element Bottom element Supply voltage (50Hz) 1750 W 750 W 1000 W 230-240 V 17 ELECTRICAL CONNECTIONS Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS COOKER MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. This cooker is designed to be connected to a 230-240V 50Hz AC electrical supply. Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. The cooker is supplied without a supply cord. A 3 core flexible supply cord must be fitted, in accordance with the specification given in the relevant tables. 1. Loosen the two fixing screws securing the back protective screen of the cooker, then lift it up and remove it. This will expose the terminal block on the right bottom corner. 2. Loosen the two cable clamp screws and lift the top section of the clamp enough to allow the cable to be passed through. 3. Connect the red (live) wire to the terminal which is marked with the letter "L". 4. Connect the black (neutral) wire to the terminal which is marked with the letter "N". 5. After fitting a green or yellow/green sleeve over the bare copper wire (earth wire), connect the exposed end to the terminal which is marked with the earth symbol or with the letter "E" coloured green and yellow. NOTE: The earth wire should be about 2 cm. longer than the live and neutral wires. 6. Secure the cable by means of the clamp screws and refit the ba...
Эта инструкция также подходит к моделям:Варочные панели - ESC5060W (502.1 kb)
Варочные панели - ESC5060W (502.1 kb)
Варочные панели - ESC5060W (502.1 kb)