Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
Touching and releasing the A or the V key pads will increase or decrease the Minute Timer setting by 1 minute with each key press (up to 99 minutes). You may also hold the A or V key to slew the time to your designated time. 2. Once the Timer Alpha-Numeric displays the desired amount of time, release the A or V Arrow key pads. The timer will display the time remaining in minutes within the countdown process. During the last 60 seconds, the timer will countdown in seconds. Note: After the timer is set, it is normal for the displayed value to automatically go down by one minute. This is due to the fact that the display only shows the minutes remaining and does not show the countdown process in the bad< ground. For example when setting the timer for 3 minutes, the timer will start counting down at 02 rain 59 seconds, but the timer display will only show D2 minutes, not the remaining seconds. Once the Minute Timer reaches DO a long beep will sound every 5 seconds until A and V key pads are touched at the same time and the timer Alpha-Numeric display will flash ,,nn.indicating that the time uu is up. At any time to cancel the minute To Cancel Minute Timer: timer, pressthe thethe Timer Set/Off pad. Fig. 15 Using the Slider Zone Control The Slider zone control is a new and innovative way to set your cooking zone power. Heat is controlled by just the touch of a finger, resulting in a clean look uncluttered by knobs or dials. These controls are intuitive, precise and very stylish. Three methods of setting these controls are available for a better ease of use. Powering On!OFF the Cooking Zone Once the cooktop is active, touch the Cooking Zone On/OFF pad (Fig. 16) to activate the slider zone control. Fig, 16 Setting the Warm & Hold Feature When the cooking zone is on, press the Warm & Hold pad (Fig. 17) to keep food at serving temperature. l Fig. 17 Cooktop Control Pads Using the Slider Zone Control Method 1 Slide your finger in the slider touch area (Fig. 18). Fig. 18 Method 2 Directly touch any position in the slider touch area (Fig. 19). Fig. 19 / Method 3 Touch < or/and > slew pads for precise power value setting. At startup, pressing < will set the control at Low (Fig. 20) and pressing > will set it at Hi (Fig. 21). Fig. 20 Zone Control Power levels Over 25 power levels are available with the slider controls. Here are the exact positions for those precise settings (Fig. 22). Fig. 22 Setting the Power Boost Feature Your induction cooktop is equipped with a power boost feature on each cooking zone. The power boost is used to bring large quantities of water or food to cooking temperature at the fastest speed possible. The power boost feature will give you up to 139% power output for a maximum of 10 minutes on most inductors (except for the right cooking zone on the 36" model which gives you 6 minutes of power boost). After 10 (or 6) minutes_ the cooking zone will continue to heat at Hi position. To turn ON the power boost feature: Press the Power Boost pa...
Эта инструкция также подходит к моделям:Варочные панели - 790.4392* (2.59 mb)
Варочные панели - 790.4392* (2.59 mb)
Варочные панели - 790.4382* (2.59 mb)
Варочные панели - 790.4382* (2.59 mb)