Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Note: Do not exert excessive pressure on the drum cylinder as this may cause damage. 5. Remove spring clip. Hold socket and pull out old bulb. 6. Hold socket and push in new bulb. Replace spring clip. 7. Insert bottom edge of removed cylinder half into bottom of drum track. Gently squeeze drum cylinder until it's top edge fits into top drum rack. Flame Generation Bulb Ember Bed Bulb Cylinder Figure 5 - Cylinder and Bulb Locations Replacing Ember Bed Bulbs 1. Unplug unit from the power supply. 2. Remove the six screws from the back of stove as shown in Figure 5. Remove back plate. 3. Locate the ember bed light bulb in the bottom of the unit shown in Figure 6. It is under the flame generation cylindrical drum toward the front of the unit. 4. Remove spring clip. Hold socket and pull out old bulb. 5. Hold socket and push in new bulb. Replace spring clip. 6. Secure the rear cover of the unit to the main frame by reattaching the 6 screws remove in step 1. Figure 5 - Screw Locations 117889-01B CLEANING AND MAINTENANCE Continued CLEANING FRONT PANEL GLASS WARNING: When cleaning unit, the power supply should be disconnected and the unit should be cool. Over time the front glass panel may become dirty or dusty. Dust can be removed by lightly rubbing the glass surface with a clean, lint free cloth or paper towel. To remove fingerprints or other marks, use a damp cloth with a good quality household glass cleaner. The front glass panel should be completely dried with a clean, lint free cloth or paper towel. CAUTION: Do not use abrasive cleaners on glass panel. Do not spray liquids directly onto any surface of the unit. STORAGE When not in use, unplug the unit from the power supply and store in dry, dust free location. TECHNICAL SERVICE You may have further questions about your electric stove. If so, contact DESA Heating Products. Technical Service Department at 1-866-672-6040. When calling please have your model and serial numbers of your heater ready. You can also visit DESAHeating Products.technical services web site at REPLACEMENT PARTS Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty. PARTS UNDER WARRANTY Contact authorized dealers of this product. If they can.t supply original replacement part(s), call DESA Heating Products. Technical Service Department at 1-866-672-6040. When calling DESA Heating Products, have ready • your name • your address • model and serial numbers of your heater • how heater was malfunctioning • purchase date Usually, we will ask you to return the part to the factory. PARTS NOT UNDER WARRANTY Contact authorized dealers of this product. If they can.t supplyoriginalreplacementpart(s),callDESAHeating Products at 1-866-672-6040 for referral information. When calling DESA Heating Products, have ready • model number of your heater • the replacement part number 117889-01B TROUBLESHOOTING WARNING: Turn off appliance and let cool before servicing. Only a qualified service person should service and repair heater. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY Stove turns off and will not 1. Stovehasoverheatedandsafe-1. Reset switch by turning main turn on ty devise has cause thermalpower switch off and waiting 5switch to disconnect or home minutes then turning it back on circuit breaker has opened Flame is not moving 1. Loose wiring 1. Inspect wiring for loose connections 2. Flame motor...
Эта инструкция также подходит к моделям:Варочные панели - CGESS (311.93 kb)
Варочные панели - CGESS (311.93 kb)
Варочные панели - CGESS (311.93 kb)
Варочные панели - CGESS (311.93 kb)