Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
This may cause permanent damage inthe form of breakage, fusion, or marring that can affect the ceramic cooktop, (This type of damage is not covered by your warranty), o Do not use dirty pans with grease buildup, Always use pans that are easy to clean after cooking, Fig. 21 The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF, The gJass surface may be HOT from residual heat transfered from the cookware and burns may occur, DO NOT TOUCH HOT COOKWARE or PANS directly with hands. Always use oven mitts or pot holders to protect hands from burns, DO NOT SLIDE Cookware across the cooktop surface. Doing so may permanently damage the appearance Induction Cookware Recommendations fNCORRECT CORRECT o Cookware not centered on Cook- o Cookware centered correctly on ing Zone surface, Cooking Zone surface, o Cuwed or warped pan bottoms or o Flat pan bottom & straight sides, sides, w I I_ Min. size _J I_ Min. size _1 o Pan does not meet the minimum o Pan size meets or exceeds the size required for the Cooking Zone recommended minimum size for used (See Fig, 19), the Cooking Zone (See Fig, 19), w o Pan bottom rests on cooktop trim o Pan rests completely on the or does not rest completely on the Cooktop surface, cooktop surface, o Heavy handle tilts pan, o Pan is properly balanced, Fig, 20 PLEASE NOTE -ANY one of the incorrect conditions Hsted above in Fig. 20 may be detected by the sensors Jocated beJow the ceramic cooktop surface, ff the cookware does not meet any of these conditions, one or more of the Cooking Zones will not heat indicated by an F in the affected Cooking Zone display. Correct the problems before attempting to activate the cooktop. Before Using the Cooktop Prior to using your cooktop for the first time, apply the recommended cooktop cleaning creme (on the web visit w_,sears,com for replacement cleaner, item number 40079) to the ceramic surface, Buff with a non-abrasive cloth or pad, This will make cleaning easier when soiled from cooking, The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions, Setting Cooktop Controls Using the Touch Contro_ The recommended way to use the touch pads on the cooktop is shown in Fig, 22, Be sure that your finger is placed in the center of the touch pad as shown, if the finger is not placed on the center of a pad, the cooktop may not respond to the selection made, Lightly contact the pad with the fiat part of your entire fingertip, Do not just use the narrow end of your fingertip, Operating the Cooking Zones The induction cooktop has four Cooking Zones designed for cookware of various sizes, Be sure to place cookware that meets the minimum and maximum pan size requirements (Fig, 19) for the Cooking Zone desired and is best for the amount of food being prepared, Place the cookware with the prepared food on the Cooking Zone BEFORE setting any of the To Turn ON one or more of the Cooking Zones: 1, Place the prepared food using the correct type and size cookware on the desired Cooking Zone, Be sure to center the cookware on Cooking Zone completely covering the minimum ring marked on the Zone surface, PLEASE NOTE: if the cookware requirements for the Cooking Zone (See Fig, 20) are not met the sensors will detect a problem and display the letter F in the affected Cooking Zone LED, Any problems must be corrected before proceeding, 2, Touch and hold the _ key pad for 2 seconds (or until a beep sounds), The Power indicator light located above the _key pad will turn ON, NOTE: if no other key pad is touched within 10 seconds the request to Power ON the cooktop will clear, 3, To start one or more of the four Cooking Zones lightly touch the 0 key pad for the Cooking Zones needed, A beep will sound and the chosen Cooking Zone power level digital display will show 0 indicating no power level for the Zone has been set yet, NOTE: if no other key pad is touched within 5 seconds the request to Power ON the Cooktop Zone wiii clear, 4, Set the desired power level for the Cooking Zone by touching either the _ or _ key pad, if the _ key pad is touched the Cooking Zone will start at a "Power Boost" maximum power level (the Cooking Zone LED will display P and the control will beep once), if the Q key pad is touched once the Cooking Zone...
Эта инструкция также подходит к моделям:Варочные панели - ELITE 790.428 (2.78 mb)
Варочные панели - ELITE 790.428 (2.78 mb)
Варочные панели - ELITE 790.428 (2.78 mb)
Варочные панели - ELITE 790.428 (2.78 mb)