Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Optional hand held remote is available. Heat Pump models provide up to a nominal 24,000 Btuh of cooling and heating. Electric heat options are available for up to 5KW of supplemental heat. This American-made evaporator offers ease of installation, operation, and service. It can be matched with EMI’s S1C/S1H 09-24 and S1C 30-36 Btuh Single-Zone Condensing Units, the S2C side discharge Multi-Zone Condensing Unit, or the T2C, T3C, and T4C top discharge Multi-Zone Condensing Units. Unit Mounted Control: • Large LCD Backlit Display • Single unit mounted control package, configurable to either unit mount or remote wall thermostat operation, reducing model number or SKU’s required. • Universal control can be used in cooling only, cooling with electric heat, heat pump, or heat pump with second stage electric heat applications. Straight Cool/Heat Pump* Nominal Circuit Capacities: WLH 9,000, 12,000, 18,000, 24,000 Btuh and WLC (only) 30,000 & 36,000 Btuh * Heat Pump only available for 9,000-24,000 Btuh units. WLC /WLH HIGH WALL EVAPORATOR • Operational range set point temperature adjustable between 55°F and 90°F in one-degree increments. • Infra red compatible control allows use of optional IR hand held controller Note:Unit mounted controls are fully functional without the handheld remote. • Operation modes include Heat, Cool, Dry, Fan and Auto Change-over. • Fan Operation – Auto/On. High or Low speed fan • Fan Purge – Fan remains on for 60 seconds after Heat/Cool call is dropped for improved efficiency (Auto mode only) • Room air sampling: Selectable time intervals ensures the fan will cycle on periodically, in Auto Fan Mode. Benefit: Helps to eliminate room temperature stratification. • Selectable Fahrenheit (°F) or Centigrade (°C) temperature scale. • Dry mode – Operates cooling and electric heat simultaneously to remove humidity. Optional electric heat must be selected. • Anti-Short Cycle Compressor Protection. • Minimum on time for heating and cooling. Benefit: Helps eliminate room temperature drop and system short cycling. • Freeze Protection – Prevents evaporator freeze up. • Test operation – Allows ease of testing after installation (all timers are eliminated). • Non-volatile back-up memory Benefit: control settings are maintained for an indefinite period during a power outage. When power is restored the equipment will resume operation after a three-minute compressor time delay. • 7-day programmable with copy feature. • Filter change indicator: A timer feature that indicates the filter should be changed according to the selected time. • Motorized supply louver with optional sweep or six stationary settings. • Modular design – reduces parts required for control STANDARD FEATURES P/N 240005842, Rev. A [05/08] WLC/WLH FEAturEs And oPtIonAL EquIPMEnt notE: Due to ongoing development programs, design and specifications may change without notice. stAndArd FEAturEs Continued package. Deco panel, relay board, ribbon cables and microprocessor all combined into one package. • Integral condensate pump safety-switch connection where-by the microprocessor monitors the condensate pump safety switch and displays an error code when a fault occurs. (Applys only with optional condensate pump) • CEC (California Energy Commission) compliant • Condensate drain pan over flow protection Cabinet Features: • Durable ABS plastic cabinet with a galvanized steel sub-chassis. • Easily accessible, washable, reusable, nylon mesh filter. • Horizontal discharge louver, constructed of high temperature ABS plastic, that can be set to oscillate, or can be parked in various pre-set positions. • Manually adjustable vertical discharge fins. • Easy access to pipe chase area from cabinet bottom. Benefit: Allows piping connections and condensate pump installation with the unit mounted on the wall. • Easily removable end-cap for access to control area for installation and service. • Condensate drain pan constructed of galvanized steel (G90U), with anti-corrosion coating. • Modular snap-in, 7-day programmable control with large backlit LCD display, a “Change filter” display feature and selectable Fahrenheit (F.), or Centigrade (C.) temperature scale. • Operational range between 55.F to 90.F, adjustable in one-degree increments. oPtIonAL EquIPMEnt • Condensate pump (field installed) • 24V remote wall thermostat • Electric heat with automatic reset high temperature cutout and redundant high temperature fuse link (when heat option is selected) • Hand held infrared controller. InstALLEr suPPLIEd ItEMs • Low voltage wiring • Power wiring • Mounting screws and fasteners • Condensate piping • Refrigerant piping (if not supplied) • Refrigerant (for interconnect charge) WLC/WLH dIMEnsIons And sPECIFICAtIons notE: Due to ongoing development programs, design and specifications may change without notice. Made in rome, new York, usA the ductless split system of Choice 2 A B C D E 5 .” 1 .” 2” 4 .” WLC/WLH PHYsICAL dIMEnsIons Model “A” depth “B” Height “C” Length “d...