Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
Allow the unit to dry for 24 hours prior to operating it to minimize the risk of damaging the circuit board. • Do not put any foreign objects into the unit or water reservoir • Clean the exterior of the unit with a soft cloth and a mild soapy water solution only • If the unit becomes noisier as it gets older and/or the airflow becomes less robust, try cleaning the fabric water curtain and pre-filter • Make sure the unit has adequate ventilation around it to ensure airflow both into the rear of the unit and out of the front of the unit • The unit will cool best in low ambient humidity situations • Unplug the unit when not in use • Never allow unobserved children to play with or around the unit • If the power cord is damaged, an authorized technician must replace it Components 5 1. Control panel 2. Display 3. Air outlet 4. Water level indicator 5. Power cord 6. Air inlet 7. Fabric water curtain 8. Pre-filter 9. Water port door 10. Water port 11. Drain plug 12. Caster (unit has 4 casters) -3- Included Accessories • Ice packs (2) • Remote control • Owner's manual and other literature Control Panel and Display Note: the buttons on the remote control have the same functionality as those on the main control panel • ON/OFF- this button turns the unit on or off 4- • TIMER- each time this button is pressed, the digit in the middle of the display increments up by 1. The digit in the display corresponds to the amount of time (in hours) that the unit will run before shutting itself off. If you do not select a timer setting, the unit will run continuously • COOLER/HUMIDIFIER- this button turns on or off the cooling function. When the “COOLER/HUMIDIFIER” light on the control panel is lit, the unit pumps water from its reservoir over the fabric water curtain. As air is drawn past this water, the endothermic effects of evaporation result in cooling • SWING- this button turns on or off the oscillation function. When the unit oscillates, the base remains still and the upper part of the tower turns back and forth, directing airflow around the room • SPEED- this button adjust the speed. There are three speed settings for airflow. Note that when the unit is initially turned on, it starts on medium speed and changes to low speed automatically • MODE- this button toggles the airflow functions. There are three functions: o Normal/manual- this mode, represented by three horizontal wavy lines, allows you to manually set the airflow speed o Natural/variable- this mode, represented by a mountain, automatically shifts the airflow speeds between the three settings o Sleep- this mode, represented by “ZZZ”, operates like the Normal/manual mode, but the airflow speed gradually decreases over a period of 1-2 hours, and the unit eventually turns itself off. The higher the initial airflow setting, the longer the unit runs before shutting off, and the greater the different airflow speeds the unit cycles through prior to shutting off -5- • -ION- this button toggles the ionizer on and off. The ionizer cleans the air that passes through the unit Unpacking and first using the unit • Carefully open the box(es) and take the unit out. Remove all packing/plastic bags, etc. • Set the unit upright • Plug the unit in • Open the water port and fill the unit with water. Do not over-fill the unit. • Close the water port door • Turn the unit on with the ON/OFF button and select your desired settings Note: the unit includes two ice boxes. To use them, fill them with water and freeze them. Then put them into the unit’s water reservoir. You may use them one at a time or concurrently. Draining the unit • If you ever need to drain the unit, first make sure the unit is in an appropriate place for drainage • Remove the drain plug from the rear of the unit • Allow the water to drain out • Reinstall the drain plug Cleaning • Pre-filter- depending on the environment, the pre-filter may require cleaning every two weeks to every two months or more. The easiest way to clean the pre-filter is to vacuum it with a brush attachment. If the pre-filter is exceptionally dirty, you may remove it from the unit (unplug the unit first) and wash it in a mild soap and water solution. Rinse it thoroughly and allow it to dry completely before reinstalling. • Fabric water curtain- this should also be cleaned every two weeks to every two months, again depending upon the environment. Unplug the unit, remove the pre-filter, and gently remove the fabric water curtain (it should pull off the fastening strips). Wash it in a mild soap and water solution. Rinse it thoroughly and allow it to dry completely before reinstalling. • Water tank- if the tank becomes dirty, mildewy, or acquires hard water deposits, unplug the unit, remove the water port door and carefully clean the inside of the tank with a soft cloth and a mild soap and water solution. Rinse out the solution and drain the unit as best you can, but take care not to get any of the ...