GENERAL SAFETY WARNING Danger of electric shocks or fire! This appliance is to be connected and used in accordance with the information stated on its rating plate. Never plug the appliance into the mains supply if the cable or the appliance itself shows visible signs of damage. This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A or more and has a socket with an earth connection. Never immerse the iron in water or any other fluid. The appliance must never be placed under the tap to fill the water. Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.) The electrical plug must not be removed from the socket by pulling the cable. Unplug the appliance from the mains supply after each use, or if a fault is suspected. Do not allow the power cord to come into contact with the soleplate when it is hot. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been give supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down. The appliance must be used and placed on a stable surface. When placed in a support, make sure that the surface on which the support stands is stable. The iron should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water, it must be checked by an authorized Technical Service Centre before it can be used again. Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use. With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorized Technical Service Centre. Unplug the iron from the mains supply when you have to leave the iron unattended. DESCRIPTION 1. Soleplate 2. Water tank 3. Spray nozzle 4. Filling inlet cover 5. Steam regulator 6. Spray button 7. Super steam button 8. Temperature regulator 9. Pilot lamp 10. “calc Function” button BEFORE USING THE IRON FOR THE FIRST TIME Fill the iron’s water tank (2) and set the temperature regulator (8) to the “Max” position. Plug the appliance in and when the iron reaches the selected temperature (the pilot lamp (9) will go out), evaporate the water by setting the steam regulator (5) to the “” position and pressing the super steam button (7) repeatedly. When using the steam for the first time, first try it away from the clothes just in case there is any dirt lodged in the steam chamber. HOW TO USE THE IRON The pilot lamp (9) will stay lit while the iron is heating up and go out as soon as it has reached the selected temperature. Once the iron is hot, you can start ironing even while it continues to heat itself. Sort your garments out based on their cleaning symbol labels, always starting with clothes that have to be ironed at low temperature. • Synthetic fibers low temperature •• Silk-Wool Medium temperature ••• Cotton – Linen High temperature FILLING THE WATER TANK (A) Set the steam regulator (5) to the “” position and unplug the iron from the wall socket. Only use clean tap water, without any type of additive. Any other type of liquid could damage the appliance. The water level should not exceed the “Max” line marked on the water tank. To obtain better and longer steam production mix tap water with distilled water in the measures shown in the table below: Water hardness Amount of distilled water per tap water Very soft / soft 0 Average 0 Hard Approx1:1 Very hard Approx2:1 Your water supply company can provide you with the hardness levels for your area. Do not fill beyond the maximum water level. IRONING WITH THE STEAM (B) Plug the iron into the mains supply and select a suitable temperature. The pilot lamp (9) will stay lit while the iron is heating up and go out as soon as it has reached the selected temperature. As soon as the iron is hot turn the steam regulator (5) to “” position, you can always regulate the amount of the steam by turning the steam selector between “” and “” When ironing with steam, make sure that the temperature control is always between the •• and Max settings. When using the steam iron for the first time, try it away from the clothes just in case there is any dirt in the steam chamber. When you have finished ironing, set the steam regulator (5) to the “” position and empty the tank. IRONING WITHOUT STEAM (C) Set the steam regulator (5) to the “” position and slid the temperature control to the desired position. The Spray and Super steam functions may be use...

Эта инструкция также подходит к моделям:
Утюги - PV1522/01 (2.2 mb)