Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
- Take the iron in one hand and tilt it slightly, soleplate downwards (D). - To open the water tank stopper, turn it anticlockwise until the arrow on the stopper points to the “open padlock” symbol (B). It will lift automatically. - Fill the tank up to the “MAX” line (D). - Re-close the tank stopper (C).To close the stopper, align the arrow with the “open padlock” symbol then turn it clockwise until the arrow is aligned with the “closed padlock” symbol. - You can now plug in your iron. Choose your ironing programme Your iron has 8 ironing programmes: A 1 2 B D 1 2 C Auto-Stop safety warning light (depending on model) 8-program control panel Water tank filler hole Shot of Steam Button Spray Button Thermostat indicator light Electric power cord Ergonomic grip Program selector Integral anti-scale system Spray Soleplate “Thermo-Alert” light (depending on model) Anti-calc valve release button Dry/Steam control Extra-large heel with non-slip pad 1- STEAM IRONING English 026548 - 05/07 What water to use ? Your appliance has been designed to function with untreated tap water. However, it is necessary to operate the Self-Clean function regularly in order to eliminate hard water deposits from the steam chamber. If your water is very hard (check with your local water authority), it is possible to mix tap water with store-bought distilled or demineralised water in the following proportions : - 50% tap water, - 50% distilled or demineralised water. Types of water not to use Heat concentrates the elements contained in water during evaporation.The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining, or premature wear of the appliance : water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your Tefal iron.Also do not to use boiled, filtered or bottled water. Warning! Before using your iron with the steam function for the first time, we recommend that you operate it in a horizontal position for a few moments, away from your linen, i.e. press the Shot of Steam button a few times. During the first few uses, a harmless odour and smoke may be given off. This has no effect on the use of the iron and will disappear quickly. Warning ! Remove any labels from the soleplate before heating up the iron (depending on model). Recommendations: Fabrics and ironing temperatures: • Your iron heats up quickly: so begin by ironing fabrics that are ironed at low temperatures first, then go on to those requiring a higher temperature, • if you change to a program requiring lower temperatures, wait for the thermostat light to come on again before continuing to iron (for models fitted with the “Thermo-Alert”, refer to the section “Thermo-Alert function”). • when ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend testing the fabric first on an inconspicious place eg (inside them). • For best results we recommend you use a vented ironing board to allow the powerful steam to penetrate through the fabric more efficiently. • Ensure that the fabric you are ironing is flat to avoid steam venting sideways whilst ironing. • For each program corresponding to a type of textile to be ironed, your iron automatically and precisely determines the most suitable temperature and steam flow to guarantee best results. • To select the appropriate ironing program, use the program selector beneath the grip (E). - Pressing on the left side : selects the programs requiring low temperature and steam levels. Beyond program 1, pressing the program selector has no effect. - Pressing on the right side : selects the programs requiring high temperature and steam levels. Beyond program 8, pressing the program selector has no effect. - The program selected appears automatically on the indicator panel at the front of the iron (F). - Set the steam control to steam ( ) - When your iron reaches the required temperature, the thermostat indicator goes out (G). You can start ironing. E F G Filling the water tank - Ideal for removing creases from suits, jackets, skirts, hanging curtains etc - Hang the garment on a hanger and hold the fabric slightly taut with one hand. The steam is very hot, so you should always do this with the garment on a hanger – never while someone is wearing it. - Set the iron to program 8 (J). - Hold the iron a few centimetres from the fabric to avoid burning delicate fabrics. - Press the Shot of Steam button ( ) repeatedly (K), moving the iron from top to bottom. (See illustration) (L). - Press the Shot of Steam button from time to time (I) - Wait a few seconds between each shot before pressing the button again. For more steam (shot of steam button) Vertical steam ironing - While ironing, press a few times in succession on the Spray button to dampen the fabric (H) and iron out obstinate creases. Spray Func...
Эта инструкция также подходит к моделям:Утюги - FV9340 (258 kb)
Утюги - FV9350 (258 kb)