Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Electric power cord 2. Reservoir refilling hatch 9. Thermostat indicator light 3. Steam control 10. Temperature setting indicator 4. Anti-calc valve 11. Thermostat button 5. Self-Clean button 12. Reservoir max indicator 6. Spray button 13. Soleplate 7. Superpressing button (depending on model) For your safety • This appliance complies with the technical rules and standards for safety currently in force (Electromagnetic Compatibility, Low Voltage, Environnement). • This appliance is not designed to be used by children or other persons unassisted or unattented if their physical, sensory or mental capacities prevent them from using the appliance in complete safety. Children should be supervised to ensure that they do not play with the appliance. • Warning ! The voltage of your electrical installation must correspond to that of the iron (220V-240V or 127V depending on model). Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. • This iron must always be plugged into an earthed socket. If using a mains extension lead, ensure that it is correctly rated (10A or 13A, depending on model), with an earth. • If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger. • The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or has functional anomalies. Never dismantle your appliance : have it inspected by an Approved Service Centre, so as to avoid any danger. • Never immerse your iron in water ! • Do not unplug your appliance by pulling on the cord. Always unplug your appliance: before filling or rinsing the reservoir, before cleaning it, after each use. • Never leave the appliance unattended when it is connected to a power source; if it has not cooled down for approximately 1 hour. • Your appliance gives off steam, which may cause burns, especially when you are ironing on a corner of your ironing board. Never direct the steam towards people or animals. • Your iron should be used and placed on a stable surface. When you put your iron onto its iron rest, make sure that the surface on which you put it is stable. • This product has been designed solely for domestic use. Any inappropriate use or use contrary to the instructions releases the brand from all responsibility and renders the guarantee invalid. Before first use • Before using your iron with the steam function for the first time, Please read these we recommend that you operate it in a horizontal position for a instructions carefully and keep them for future few moments, away from your linen, i.e. press the Superpressing reference. button a few times (depending on model). Remove any labels from • During the first few uses, a harmless odour and smoke may be the soleplate before given off. This has no effect on the use of the iron and will disap-heating up the iron pear quickly. (depending on model). What water to use ? If you have very hard • Your appliance has been designed to function with untreated water, mix tap water with tap water. However, Self-cleaning of the appliance should be commercially available carried out once a month. demineralised water in the • Never use any of the types of water below that contain orgafollowing ratio : nic waste or mineral elements and may cause spitting, brown - 50% tap water, GB - 50% demineralised water. staining or premature ageing of your appliance : commercially available pure demineralised water, water from tumble dryers, scented water, softened water, water from refrigerators, water from batteries, water from air conditioners, distilled water, rain water, boiled or filtered water, bottled water, etc. • The integrated anticalc system (according to model) gives better quality ironing: a constant flow of steam throughout the ironing session and lasting performance of your appliance. Preparation Filling the water tank • Unplug your iron before filling it and set the steam control to Fill the tank up to the (fig 1). “MAX”. • Open the reservoir refilling hatch (fig 2), place the iron flat and fill it (fig 3). • Close the reservoir refilling hatch. Use Adjust the temperature and the steam It is normal for the indi-• Select the temperature (see table below or iron’s heel) setting cator light to switch on the termostat facing the indicator (fig 4). and off during ironing. • The thermostat light comes on (fig 5). It will go out when the In order to avoid water soleplate is hot enough. dripping from the iron onto the linen : • Set the steam control (fig 6) to the desired position, consulting - turn off the steam when the table below. ironing silk or synthetic fabrics. -set it at the minimum position for wool. If y wn the thermost ait until the thermostat light comes back on bef e beginning to ir ain. When ironing f brics with mixed fibres, set the ironing temper or the most delic e. For delicate fabrics w ecommend te abric first on an inconspicious place eg (inside the hem). If y to...