Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
This basically consists in using non-contaminatingmaterials which should be handed over to the local waste disposal service as secondary raw materials. your local town council can give you informationabout how to dispose of obsolete appliances. This appliance is labelled in accordancewith European Directive 2002/96/Egconcerning used electrical andelectronic appliances (waste electricaland electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. Tips to help you save energy Steam production consumes the most energy. Tohelp minimise the energy used, follow the advicebelow: . Start by ironing the fabrics that require thelowest ironing temperature. . Check the recommended ironing temperatureon the label on the garment. . regulate the steam according to the selectedironing temperature, following the instructions in this manual. . Try to iron the fabrics while they are still dampand reduce the steam setting. Steam will begenerated from the fabrics rather than the iron. if you tumble dry your fabrics before ironingthem, set the tumble drier on the ‘iron dry’ programme. . if the fabrics are damp enough, turn off thesteam regulator completely. ENglISH 15 SIEMENS Trouble shooting problem possible causes Solution Trouble shooting problem possible causes Solution ENglISH The steam generator does not come on. The iron does not heat up. The iron begins tosmoke when switched on. Water lows throughthe holes on the sole plate. Dirt comes out through the sole plate. The iron does not produce any steam. • There is a connection problem. • The main power button is not switched on. • The main power button is not switched on. • The temperature control knob is set tothe “min” position. • During irst use: Certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. • During later use: the soleplate may besoiled. • The steam function is being usedbefore it has reached temperature. • The water is condensing inside thepipes because steam is being used for the irst time or has not been used for a long time. • There is a build-up of scale or minerals in the boiler. • Chemical products or additives havebeen used. • The boiler is not switched on or is empty. • Check the mains cable, the plugand the socket. • Switch the main power button (8) to the on position.(“i”) • Switch the main power button (8) to the on position.(“i”) • Set the temperature control knob (11) to the desired position. • This is completely normal andwill stop after a short while. • Clean the soleplate according tothe cleaning instructions in this manual. • reduce the steam low when ironing at low temperatures (variable steam control (9)). • point the iron away from theironing area and press the steam release button (12) until steam is produced. • Clean the boiler Use tap water mixed 50% withdistilled or demineralised water. if the tap water in your districtis very hard, ...
Эта инструкция также подходит к моделям:Утюги - TS14420/02 (2.12 mb)
Утюги - TS14420/03 (2.12 mb)
Утюги - TS14420/04 (2.12 mb)
Утюги - TS14421/01 (2.12 mb)