Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
To prolong the optimum operation of the steam function, mix tap water with distilled water 1:1. If the tap water in your area is very hard, mix tap water with distilled water 1:2. Never fill beyond the “max” water level mark. Getting ready (1) Ironing without steam (2) Begin ironing but without pressing the steam release button. Ironing with steam (3) The steam function is only available when the temperature regulator is in the areas marked by the steam symbol between “••” and “max”. Select the steam setting using the steam regulator dial. – steam setting “-” for temperature setting “••” or thin fabrics – steam setting “+” for temperature setting “•••” and “max” or thick fabrics If you press the steam button when the water tank is empty, you will hear the distinctive sound of the pump working without water.. This should be carried out every 6 months The descaling fluid can be obtained from our After-sales service or specialist outlets. Accessory code (After-sales service) Name of accessory (Specialist outlets) 311144 TDZ1101 Follow the procedure described below: a) Ensure that the iron has cooled down and that the water tank is empty b) Set the temperature regulator to the “calc‘n clean” setting c) Fill the water tank with a jug full of clean tap water (or fill the special filling bottle halfway, depending on the model) mixed with a measure of the descaling fluid. d) Plug in the iron and select the maximum steam setting. e) Hold the iron over a sink or a container to collect the water. f) Press the steam button until the water tank is empty. This could take several minutes. g) Then follow the procedure described above in section “3. calc‘n clean” until particles no longer come out of the base of the iron. “Secure” auto shut-off function (8) (Depending on model) The “Secure” auto shut-off function switches off the iron when it is left unattended, thus increasing safety and saving energy. After plugging in the iron, this function will be inactive for the first 2 minutes in order to give the iron time to reach the set temperature. After this time, if the iron is not moved for 8 minutes while in the upright position or 30 seconds while resting on its soleplate or on its side, then the safety circuit will switch the appliance off automatically and the indicator light will start flashing. To reconnect the iron, simply move it about gently. Anti-drip system (Depending on model) If the temperature is set too low, the steam is automatically switched off to avoid dripping. Storing (9) Turn the steam regulator to the “-” setting. Cleaning (10) Tips on disposing of a used appliance Before throwing a used appliance away, you should first make it noticeably inoperable and be certain to dispose of it in accordance with current national laws. Your Retailer, Town Hall or Local Council can give you detailed information about this. This appliance is labelled in accordance with European Directive 2002/96/CE – concerning used electrical and electronic appliances (was...
Эта инструкция также подходит к моделям:Утюги - TDS1102/02 (3.23 mb)
Утюги - TDS1115/01 (3.23 mb)
Утюги - TDS1119/01 (3.23 mb)
Утюги - TDS1130/01 (3.23 mb)