Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
. If necessary, the user can ask the public power supply company for the system impedance at the interface point. • The appliance must never be placed directly under the tap to fill the water tank. • Unplug the appliance from the mains supply after each use, or if a fault is suspected. • The electrical plug must not be removed from the socket by pulling the cable. • Never immerse the iron in water or any other fluid. • Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.). Tips to help you save energy Steam production consumes the most energy. To help minimise the energy used, follow the advice below: • Start by ironing the fabrics that require the lowest ironing temperature. • Regulate the steam according to the selected ironing temperature. • Only use steam if necessary. If possible, use the spray function instead. • Try to Iron the fabrics while they are still damp and reduce the steam setting. Steam will be generated from the fabrics rather than the iron. If you tumble dry your fabrics before ironing them, set the tumble drier to the ‘iron dry’ programme. • If the fabrics are damp enough, turn off the steam regulator completely. • Stand the iron upright during pauses. Resting it horizontally with the steam regulator on generates wasted steam. GUARANTEE TERMS The terms of the guarantee for this appliance are in accordance with that stated by our representative for the country in which it is sold. Details of those conditions can be obtained from the retailer from whom the appliance was purchased. The SALES RECEIPT must be presented when making any claims against the terms of this guarantee. We reserve the right to make technical modifications. You can download this manual from the local homepages of Bosch max. Problem Possible Causes Solution Iron does not work or is not heating up Temperature control (H) set to minimum Turn the temperature control to the desired position Connection problems Check that the plug is inserted into the mains socket correctly The automatic shut-off system has been activated (*) Move the iron gently from side to side to re-start it Iron is not steaming There is no water in the tank (D) Fill the water tank The steam regulator (A) is in the position Set the steam regulator to the relevant position Water is dripping from the holes in the soleplate Temperature control (H) setting is too low. Set the temperature control within the steam area (between the “••” and “max”) or turn the steam regulator (A) to Steam regulator (A) is set too high in conjunction with a low temperature. Turn the steam regulator to a lower setting. You have pressed the shot of steam button (L) repeatedly without waiting for 5 seconds between each press Wait 5 seconds between each press of the jet of steam button Water has been left in the tank (D) when the soleplate was cold, with the steam regulator (A) set at or Always empty the tank after ironing and set the steam regulator to after ironing and when filling the tank Distilled water has not been used (see “Filling the water tank” section) or other products such as fragrant water have been added to the tank Mix distilled water with tap water as directed in the “Filling the water tank” section and never add any other products to the water tank Spray does not work. No water in the tank. Add water to the water tank. Obstructed mechanism. Contact an Authorised Technical Service Centre. The iron begins to smoke when switched on. During first use: Certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. This is completely normal and will stop after a short while. Deposits come out through the holes in the soleplate Traces of lime scale are coming out of the steam chamber Carry out a cleaning cycle (see “self cleaning” section) Flashing lamp on top of handle Auto-shut off has been activated. Move the iron gently fromside to side to re-start it. The lamp will then flash once before it re-heats Using Your Iron 1 Your iron max. L. Shot of steam K. Auto shut off indicator lamp J. Power cable I. Pilot light G. Pointer F. Max. Water level D. Water tank C. Spray outlet B. Water tank cover A. Steam regulator E. Soleplate N. Beaker* M. Spray button H. Temperature control O. "Clean" button * (* model dependent) 2 Filling the water tank Set the steam regulator (A) to the “ ”position and unplug the iron from the mains! 1. Place the iron at an angle of 45° with the point facing upwards. 2. Fill the water tank (D) via the water tank inlet but never above the “max” mark (F). Use only clean water from the tap without mixing anything with it. The addition of other liquids, such as perfume, will damage the appliance. Any damage caused by the use of the aforementioned products, will make the guarantee void. Do not use condensation water from tumble dryers, air conditioners or similar appliances. This appliance has been designed to use normal tap water. To prolong the optimum steam fu...
Эта инструкция также подходит к моделям:Утюги - TDA5631GB/01 (586 kb)