Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Temperature control (I) on a very low setting. Turn the temperature control to the desired position. Connection problems. Check that the plug is inserted into the mains socket correctly. The clothes tend to stick. Temperature control (I) setting is too high. Turn the temperature control to a lower setting. Water comes out of the soleplate together with steam. Temperature control (I) setting is too low. Turn the temperature control to a higher setting. Steam regulator (A) is set too high in conjunction with a low temperature. Turn the steam regulator to a lower setting. You have pressed the shot of steam button (L) repeatedly wihhout waiting for 5 seconds between each press. Wait 5 seconds between each press of the shot of steam button. Tap or part distilled water has not been used (see“Filling the water tank“ section) or other products such as fragant water have been added to the tank. Mix distilled water with tap water as directed in the „Filling the water tank“ section, and never add any other products to the water tank. Iron is not steaming. Steam regulator (A) in “0” or “calc” position. Turn the steam regulator to “1” or “2” position. No water in tank. Fill the tank. Scale obstruction of internal components. Remove the steam regulator (A) and clean it. If this does not help contact an Authorised Technical Service Centre. Spray does not work. No water in the tank. Add water to the water tank. Obstructed mechanism. Contact an Authorised Technical Service Centre. Water comes out from the soleplate before plugging the iron in. The steam regulator (A) is not properly closed. Place the steam regulator in the “0” position. Deposits come out through the holes in the soleplate. Traces of lime scale are coming out of the steam chamber. Carry out a cleaning cycle “(see “Multiple de-scaling system” section) The iron begins to smoke when switched on. During first use: Certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. This is completely normal and will stop after a short while. Flashing lamp on top of handle (*) Auto-shut off has been activated. Move the iron gently fromside to side to re-start it. The lamp will then flash once before it re-heats. TDA 26.. calc sensixx B1 Customer Service Great Britain Bosch Customer Service Grand Union House Old Wolverton Road Milton Keynes MK12 5PT UK +44 (0)844 892 8923 IRL +353 (0)1450 2655 Operating instructions (*) Model dependent You can download this manual from the local homepages of Bosch 003 TDS26..GB/01/12 Thank you for buying the TDA26 steam iron from Bosch. This iron has a lightweight design and is built to perform. These instructions contain valuable information about the unique features of this iron and some hints to make ironing easier for you. Please visit for more product information or to register your product, just follow the link to the Online guarantee registration. Before using ...
Эта инструкция также подходит к моделям:Утюги - TDA2601GB/05 (1001.16 kb)
Утюги - TDA2602GB/03 (1001.16 kb)
Утюги - TDA2602GB/05 (1001.16 kb)
Утюги - TDA2612GB/01 (1001.16 kb)