Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Before first use 1 Remove any sticker or protective foil from the soleplate. 2 Let the iron heat up to maximum temperature. 3 Pass the iron over a piece of damp cloth for several minutes to remove any residues from the soleplate. Note:The iron may give off some smoke when you use it for the first time.This ceases after a short while. Preparing for use Filling the water tank Make sure the appliance is unplugged. Set the steam control to the ‘no steam’ position (Fig. 2). Tilt the iron backwards. Open the cap the of filling opening (Fig. 3). Never immerse the iron in water. 1 2 3 4 5 Fill the water tank with tap water up to the maximum level. (Fig. 4) Do not fill the water tank beyond the MAX indication. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. Note: If the tap water in your area is very hard, we advise you to mix it with an equal amount of distilled water or to use distilled water only. 6 Close the cap of the filling opening. Setting the temperature Put the iron on its heel. To set the required ironing temperature, turn the temperature dial to the appropriate position (Fig. 5). 1 2 Check the laundry care label for the required ironing temperature: 1 Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester) 1 Silk 2Wool 3 Cotton, linen If you do not know what kind or kinds of fabric an ar ticle is made of, determine the right ironing temperature by ironing a par t that is not visible when you wear or use the ar ticle. Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. Star t ironing the ar ticles that require the lowest ironing temperature, such as those made of synthetic fibres. 3 Put the mains plug in an earthed wall socket. The temperature light goes on (Fig. 6). , 4 When the temperature light has gone out, wait a while before you start ironing. The temperature light goes on from time to time during ironing. Using the appliance Steam ironing 1 2 3 Make sure that there is enough water in the water tank. Select the recommended ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature’). After the temperature light has gone out, set the steam control to the appropriate steam position. Make sure that the steam setting you select is suitable for the ironing temperature selected: (Fig. 7) Temperature settings 2 to 3 for minimum steam 1. Temperature settings 3 to MAX for maximum steam 2. The iron star ts to produce steam as soon as it reaches the set temperature. Ironing without steam 1 2 Set the steam control to the ‘no steam’ position (Fig. 2). Select the recommended ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature’). Cleaning and maintenance After ironing Remove the mains plug from the wall socket and let the iron cool down. Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. 1 2 To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. 3 Clean the upper part of the appliance with a damp cloth. 4 Regularly rinse the water tank with water. Empty the water tank after cleaning. Calc-Clean function Use the Calc-Clean function once ever y two weeks. If the water in your area is very hard (i.e. when flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. Set the steam control to the ‘no steam’ position (Fig. 2). Set the temperature dial to MAX. Fill the water tank to the maximum level. 1 2 3 Do not pour vinegar or other descaling agents into the water tank. 4 Put the mains plug in the wall socket. 2 5 6 7 5 6 7 Unplug the iron when the temperature light goes out. Hold the iron over the sink and set the steam control to the Calc-Clean position . Hold the steam control at the Calc-Clean position and gently shake the iron until all the water in the tank has been used up (Fig. 8). ,8 Steam and boiling water come out of the soleplate. Scale (if any) is flushed out. After you have used the Calc-Clean function, set the steam control to the ‘no steam’ position. 9 Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles. After the Calc-Clean process 1 Connect the iron to the mains to let the soleplate dry. 2 Unplug the iron when the temperature light goes out. 3 Move the iron gently over a piece of used cloth to remove any water stains that have formed on the soleplate. 4 Let the iron cool down before you store it. Storage 1 Unplug the appliance and set the steam control to the ‘no steam’ position. 2 Empty the water tank (Fig. 9). 3 Wind the mains cord round the cord storage facility. (Fig. 10) 4 Store the iron on its heel in a safe and dry place. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing thi...