Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 10.38 mb Название файла: Язык инструкции:

EnGlish using the appliance steam ironing The supply hose may become hot during a long ironing session. Note:The system may occasionally produce a pumping sound during steam ironing.This is normal and tells you that water is pumped into the steam generator. 1 2 3 Make sure there is enough water in the water tank. Make sure the appliance is plugged in and switched on (see chapter ‘Preparing for use’). Set the required ironing temperature (see chapter ‘Preparing for use’). Steam ironing is only possible at ironing temperatures higher than 2. 4 Set the required steam setting with the + and - buttons on the steam generator control panel (Fig. 6). p for maximum steam (temperature setting MAX). [ for moderate steam (temperature settings 3 to MAX). ECO for minimum steam (temperature settings 2 to MAX). a for no steam (temperature settings 1 to MAX). The steam light flashes to indicate that the steam generator is heating up. , After approx. 2 minutes, the steam light stays on continuously to indicate that the steam , generator is ready for steam ironing. Note: During ironing, you can adjust the steam setting with the + and - steam buttons. It takes a few moments before the amount of steam is adjusted. 5 Press the steam trigger to start steam ironing (Fig. 7). When you put down the iron during ironing, put it on its heel or on the iron stand. The opening and closing of the steam valve in the steam generator causes a clicking sound. , This is normal. steam lock function The steam lock allows you to steam iron non-stop without having to press the steam activator continuously. -When you slide the steam lock forwards, the iron produces steam continuously.To stop steaming, slide the steam lock backwards (Fig. 8). -When the steam lock is deactivated, the iron only produces steam when you press the steam trigger. Note: Release the steam lock when you put the iron on its heel or on the iron stand.This prevents that hot steam escapes from the iron or that the iron stand gets wet. vertical steaming Never direct the steam at people. 1 Hold the iron in vertical position and press the steam trigger to steam iron hanging curtains and clothes (jackets, suits, coats) (Fig. 9). shot of steam A powerful shot of steam helps to remove stubborn creases. 1 2 Set the temperature dial to a position between 3 and MAX. Press the shot-of-steam button (Fig. 10). Note: Use the shot-of-steam function intermittently. If water droplets come out of the soleplate, let the iron heat up for at least one minute before you use the shot-of-steam function again. 10 EnGlish ironing without steam There are one or two ways to iron without steam: -All types: Simply star t ironing without pressing the steam trigger. -Select steam setting a (no steam) and star t ironing. (Fig. 11) tips -When you steam iron woollen fabrics, shiny patches may occur.To prevent this, use a dr y pressing cloth or turn the ar ticle inside out and iron the reverse side. -Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. -Iron velvet and other fabrics that tend to acquire shiny patches in one direction only (along with the nap) while you apply ver y little pressure. -Do not use steam when you iron coloured silk.This could cause stains. Cleaning and maintenance after ironing Put the iron on the iron stand (see chapter ‘Storage’) and switch off the appliance (Fig. 12). Remove the mains plug from the wall socket and let the appliance cool down. Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. Clean the upper part of the iron and the outside of the steam generator with a moist cloth. Empty the water tank after cleaning. Calc-Clean function 1 2 3 4 5 Never remove the Calc-Clean rinsing cap when the steam generator is hot. VERY IMPORTANT: Rinse the steam generator once a month or after every 10 times of use, to prevent damage to the appliance and for optimal steaming performance. Unplug the appliance and let it cool down for 2 hours. Remove the detachable water tank (Fig. 13). Hold the steam generator with both hands and shake well (Fig. 14). Turn the steam generator on its side with the Calc-Clean rinsing cap facing upwards, and remove the Calc-Clean rinsing cap (Fig. 15). Empty the steam generator into the sink (Fig. 16). Fill the steam generator with fresh water and shake again (Fig. 17). Empty the steam generator into the sink again (Fig. 16). Repeat steps 6 & 7 twice to obtain the best result. Screw the Calc-Clean rinsing cap tightly back onto the steam generator (Fig. 18). Calc-Clean light The Calc-Clean light flashes for 30 seconds when it is time to rinse the steam 1 2 3 4 5 6 7 8 9 1 generator (Fig. 19). The steam generator does not heat up during these 30 seconds. 2 Switch off the appliance immediately and let it cool down. EnGlish 11 Do not use the Calc-Clean function when the steam generator is hot. Use the Calc-Clean function as described above. storage Place the iron on ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: