Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
6 Hold the iron over the sink and set the steam control to the Calc-Clean position . (Fig. 12) x 4239.000.6155.29 7 Pull the steam control slightly upwards and gently shake the iron until all water in the tank has been used up. Steam and boiling water come out of the soleplate. , Scale (if any) is flushed out. 8 After you have used the Calc-Clean function, press down the steam control while you turn it to position O. Note: Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles. After the Calc-Clean process 1 2 3 4 Connect the iron to the mains to let the soleplate dry. Unplug the iron when the temperature light goes out. Move the iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate. Let the iron cool down before you store it. Cleaning the steam control needle 1 2 Pull the steam control out of the appliance. (Fig. 13) Use vinegar to remove scale, if any, from the needle (Fig. 14). Do not bend or damage the steam control needle. 3 Reinsert the steam control. Place the point of the needle exactly in the centre of the hole and fit the small projection on the side of the needle into the slot (Fig. 15). 4 Set the steam control to position O. Storage 1 2 3 4 Unplug the appliance and set the steam control to position O. Empty the water tank (Fig. 16). Wind the mains cord round the cord storage facility. Store the iron on its heel in a safe and dry place (Fig. 17). Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment(Fig.18). Guarantee & service If you need service or information or if you have a problem, please visit the Philips website at com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country,go to your local Philips dealer. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. ProblemCauseSolution The iron is plugged in but the soleplate is cold. The iron does not produce any steam. Water leaks from the soleplate during ironing. The spray function does not work (specific types only) Flakes and impurities come out of the soleplate during ironing. The automatic shut-off light flashes (specific types only). Water leaks from the soleplate while the iron cools down or after it has been stored. The steam boost function or vertical steam boost function does not work (specific types only). There is a connection problem. The temperature dial is set to MIN. There is not enough water in the water tank. The steam control is set to position O. The iron is not hot enough. There is not enough water in the water t...
Эта инструкция также подходит к моделям:Утюги - GC1701 (706.95 kb)
Утюги - GC1830 (706.95 kb)
Утюги - GC1702 (706.95 kb)
Утюги - GC1705 (706.95 kb)