Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
The SHOT OF STEAM® feature may be used continuously with just a short pause between shots. VERTICAL STEAM (select models only) allows your iron to function as a garment steamer. Tip: When using vertical steam on clothing, hang the clothing on a clothes hanger for best results. Hanging curtains and drapes may also be steamed. To use Vertical Steam: 1. Make sure that the iron has heated up (2 minutes). 2. Hold the iron in a vertical position, with the iron close to but not touching the fabric you want to steam. 3. With your other hand, pull the fabric tight. 4. Press the SHOT OF STEAM® button in approximately 3-second intervals as you move the iron across the wrinkled area. WARNING: To prevent the risk of burns, keep your hand away from the area being steamed. WARNING: DO NOT steam garments while wearing them; this may result in injuries. 30 MINUTE TIMED AUTO-OFF When the iron is plugged in, the Auto-Off activates automatically after 30 minutes. The Auto-Off will activate in any position after the 30 minutes. Once the Auto-Off activates, the power indicator light will turn off and the iron stops heating. To restart the iron: Press the Restart Button (Power Indicator Light). If you do NOT want to iron any longer, unplug the iron. Then move the Variable Steam Lever to (Dry) and the Fabric Select to Off. WARNING: The Auto-Off is a safety feature and is not a recommended means for turning your iron off. See “Caring for Your Iron After Use.” STORAGE STRIP® INDICATOR (select models only) is an easy way to see when the iron is cool enough to store. To use the Storage Strip® Indicator: Turn iron on. In approximately 2 minutes, the Storage Strip® Indicator will turn from black to red, indicating that the iron is too hot to store. When the iron is turned off, it will take the iron approximately 30-40 minutes for the Storage Strip® Indicator to turn from red to black, indicating that the iron is cool enough to store. CAUTION: The STORAGE STRIP® indicator should only be used as a guideline. The iron should always be handled and stored with care. CARING FOR YOUR IRON AFTER USE TURNING OFF YOUR IRON 1. Turn the Variable Steam Lever to (Dry) and Fabric Select to Off. 2. Unplug the iron from the power source. WARNING: NEVER yank the power cord when unplugging the iron. This can damage the cord. STORING YOUR IRON 1. Turn off iron and unplug from outlet. Allow the iron to cool. 2. If you do not use your iron on a daily basis, empty the water reservoir after each use for a longer iron life. To do so, unplug the iron, turn the iron upside down, open the fill hole cover, and allow water to flow from the fill hole. Shake the iron gently to remove trapped water drops. 3. Loosely loop the power cord around the heel rest and store the iron on its heel rest. IMPORTANT: Wrapping the cord around the iron too tightly can damage the cord. Tip: When not ironing, always set the Variable Steam Lever to (Dry) and the Fabric Select to Off. MAINTAINING YOUR CLASSIC IRON CLEANING THE ...
Эта инструкция также подходит к моделям:Утюги - 121998 (583.6 kb)
Утюги - 3019 (583.6 kb)
Утюги - 3026 (583.6 kb)