|
Фото и характеристики Kenwood IC450 |
Фрагмент инструкции
If there’s no label, here’s a guide on which temperature to choose: hints . Start on clothes needing the lowest temperature, then work upwards. (This lowers the risk of burning something because an iron switched from ‘hot’ to ‘cool’ takes time to cool down.) . For mixed fibres, eg cotton ... and polyester ., use the lowest suitable temperature .. . If in doubt, start with a low temperature on a part that won’t be seen (eg a shirt tail). setting the temperature Before switching on the steam station, make sure that the lock for continuous steam is in the off position by firmly pressing the lock on the left hand side of the iron. This will ensure that the steam button is released. 1 Plug the steam station into the power supply. 2 Switch on, the blue light will glow. 3Turn the temperature control to the temperature you want, the light under the control will glow. When the iron reaches the set temperature, the light will go out. (During ironing, this light will go on and off as your iron maintains the right temperature.) dry ironing Follow the procedure above for setting the temperature. Care should be taken not to press the steam button. steam ironing 1 Make sure there is water in the boiler. Plug into the power supply and switch on. 2Turn the temperature control to the desired setting. For best results when steaming we recommend that the temperature control should be set to . It is possible to vary the amount of steam produced. If the iron is set to . move the variable steam control to the left for minimum steam. If .. is selected move the variable steam control to the middle and if ... is selected move the variable control to the right for maximum steam. 3Wait until the green ready to steam light glows indicating that the correct pressure has been reached. This takes about 8 minutes. (Also wait until the temperature control indicator light has gone off.) . During ironing the light will turn on and off - this is normal and indicates steam is generated in the boiler. 4 4 Before starting to iron or if you have not used the steam function for a few minutes or if you have recently cleaned the steam station, hold the iron away from your ironing and press the steam button several times. This will enable any cold water condensed in the pipes etc., to be removed from the steam circuit. 5To produce steam whilst ironing clothes press the steam button. For continuous steam, press the steam button and then press the lock for continuous steam on the right hand side of the iron. To stop continuous steam, press the button on the left hand side. When using the steam function, the green ready to steam indicator light will go off. . It is possible to vary the amount of steam produced. Move the variable steam control to the right for maximum steam and to the left for minimum steam. 6 If you need to refill the boiler during ironing, follow carefully the instructions given under ‘refilling the boiler’. NEVER UNSCREW THE BOILER CAP AS LONG AS THE BOILER IS UNDER PRESSURE. . The red warning light will glow indicating that the level of water in the tank is low. hints . Wool and velvet. Guide the iron 2 cm above the fabric, depressing the steam button. The power of steam smoothes away creases and revitalises the fabric. Do not pull the fabric. . Vertical ironing – suits, dresses and curtains are smoothed, renewed and put into shape again while they are hanging (see next page). PTFE soleplate (model IC450 only) The soleplate can be fitted when ironing delicate items such as silk. Follow the instructions given on the packaging and keep them handy for future use. Always take care when fitting, particularly if the iron is hot. If the soleplate (Kenwood model ICSP01) is not included in pack it can be purchased separately by calling 0870 2413653 quoting part number KW675439. steaming the creases out of curtains, hanging clothes, wall hangings 1Make sure there is water in the boiler. 2Turn the temperature control to . 3 When the green ready to steam light glows pull the material slightly with one hand: hold the iron upright with the other. 4Tilt the iron forwards, then move it down the material, pressing the steam button. . Never steam clothes being worn. Keep your hands away from the steam and soleplate. . Always ensure that the iron is facing away from the user and/or others when vertical steaming. . For material other than linen or cotton, keep the iron off the material to avoid burning it. care and cleaning . Always switch off, unplug and allow to cool before cleaning or storing. . There is no need to empty the boiler unless you intend to leave the steam station unused for a long period of time. 5 the outside soleplate . Don’t scratch the outside by ironing anything hard eg zips. . To remove minor remains of material stuck to the soleplate, rub lengthways with a soft, damp, nonmetallic cleaning pad. casing . Wipe with a damp cloth. the inside important To extend the life of your steam station and to avoid a build up of scale, it is essen...
Эта инструкция также подходит к моделям:Утюги - IC400 (92.27 kb)