Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
3 Unlock the tank using the tank release knob „. Slide out the water tank and fill (see filling instructions). 4 Alternatively, you can re-fill the tank in ‘situ’ through the filler ‚. Steam ironing 1 Connect the appliance to a suitable mains outlet. Press the power ‘ON’ button Awhich will glow red. ALL MODELS After a few minutes, the light changes to green - indicating the boiler is ready to generate steam. Check the iron temperature indicator light ¤has switched off, indicating the iron is ready to use. MODELS WITH VARIABLE STEAM 42288, 42297, 42298 & 42299 This model automatically selects the middle steam setting as the default setting. To select a different steam setting, press the steam button Ito select the desired steam level. 2 Turn the temperature dial › on the iron in a clockwise direction, select dot-1, dot-2 or dot-3 according to the recommendation of the garment label. 3 The iron’s temperature indicator light ¤goes off when the required temperature is reached. A B 7 7 42288 rev4 14/3/08 11:14 Page 7 8 8 4 Depress the steam button .for 1 minute to clear the system of air (first time use only). This will be accompanied by a clicking noise which is quite normal. 5 Begin first time ironing with an old towel. Note: If you press the steam button before the steam generator reaches it’s required temperature, a warning double beep will sound. 6 The appliance is ready to use. 7 Press the steam button .for steam ironing. 8 Depress the power switch A to turn off the base unit when ironing is complete. MODELS WITH SPRAY FEATURE Certain models are fitted with a spray feature. Stubborn creases and excessively dry clothing can be softened by damping the material with water. This procedure means ironing can be achieved without applying excessive pressure. Filling C To fill the tank with water, press the release button Oand lift away the spray unit I. Pull the tank ! away from the spray unit in a downward direction, taking care not to damage the tank, and fill water to the ‘Full’ mark. Re-assembly C Attach the tank to the spray unit, taking care to align the parts correctly. Locate the spray unit to the front of the iron and press it home until the unit locks into place. Press the pump O a few times to purge the air from the system, when a fine mist of water is created, the unit is ready for use. Dry ironing 1 Connect the appliance to a suitable mains outlet. 2 42288, 42297, 42298 & 42299: Press the steam switch I2 times until all three steam level indicator lights go off (steam off mode). 3 Turn the temperature dial › on the iron in a clockwise direction, select dot-1, dot-2, or dot-3 according to the recommendation of the garment label. 4 The temperature indicator light ¤ glows on the iron, indicating that it is switched on. 5 When the required temperature is reached, the temperature indicator light on the iron goes off. The iron is ready to use. It is always a good idea to begin with ‘cool’ fabrics and work up to higher settings. An iron heats up quicker than it cools down so you’ll save time and electricity. Auto-shut off (42288, 42297, 42298 & 42299) An auto-shut off system will activate if the steam is not used for over 15 minutes. The mains indicator light A will flash between green and red indicating the unit is in ‘sleep mode’. When this occurs, press the steam select button Ior the power switch A‘ON’ once. The appliance will switch on immediately and you need to check, and select, the required setting. ANTI-SCALE SYSTEM The anti-scale cartridge is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However, please note that the anti-scale cartridge will not completely stop the natural process of limescale build-up. When the cartridge needs replacing, the indicator light A will flash. NOTE: The unit will not switch off, but you need to replace the cartridge as soon as possible. C O ! I O UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 42288 rev4 14/3/08 11:14 Page 8 Replacing antiscale medium D 1 When the indicator light A flashes, you need to replace the anti-scale cartridge E. 2 The steam generator needs to be connected to the mains supply. 3 Remove the tank from the base unit. 4 Remove the anti-scale cartridge which is situated behind the tank, and replace the cartridge, making sure the replacement unit is pushed firmly in position. 5 Re-position the tank. 6 If the cartridge is not fitted correctly, the unit will not function. The ‘calc’ light A will flash, accompanied by a beep sound. Re-fit the cartridge and the unit will operate as intended. Note: A cartridge should filter 40 litres of hard water. Replacement anti-scale refills To obtain replacement antiscale refills, telephone our spares number on: 0844 873 0719. • If a new re-fill is not available, you may continue operating the appliance, but scale will build up in the system. Replace the anti-scale refill as soon as possible. Pa...
Эта инструкция также подходит к моделям:Утюги - ELITE PRO (466.72 kb)