Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
При этом в емкости должна находиться вода. ГЛАЖЕНИЕ БЕЗ ПАРА Включите прибор в сеть. Установите регулятор режимов отпаривания/самоочистки (4) в позицию Ж На терморегуляторе (8) выберите подходящую для изделия температуру глаженья. Когда лампочка индикатора погаснет, можно начинать гладить. 12 ENGLISH 9. Disconnect the iron from mains supply outlet. 10. When the iron gets cool completely, store it vertically in a safe place. Note: Set the Steam Control Knob to this position after use: X BURST OF STEAM This function provides extra amount of steam to remove stubborn wrinkles. 1. Fill the iron as described in the section of Flow To Fill Water. 2. Turn the Temperature Dial to '•••' setting. 3. Pilot light glows indicating the iron is switched on. 4. Pilot light goes off when the required temperature is reached. 5. The iron is ready for use. 6. Press the Burst Of Steam Button once. 7. Steam will shoot from the holes of the soleplate into the fabric being ironed and removing the wrinkles. 8. For stubborn wrinkles, wait a few seconds before pressing the Burst Of Steam Button again. Most wrinkles can be removed within three presses. Note: It may be necessary to press the burst of steam button a few times to start this function. For optimum steam quality, do not operate the Burst Of Steam more than three times after the pilot light goes off. BURST OF STEAM IN VERTICAL POSITION Warning: Do not apply steam on any clothes or fabrics that are being worn by human or pets. Temperature of steam is very high. This function provides extra amount of steam to remove wrinkles on delicate garments in hanging position, hanging curtains, or other hanging fabrics. 7 1223.qxd 13.01.04 15:22 Page 14 ENGLISH 1. Fill the iron as described in the section of Flow To Fill Water. 2. Turn the Temperature Dial to '•••' setting. 3. Pilot light glows indicating the iron is switch on. 4. Pilot light goes off when the required temperature is reached. The iron is now ready for use. 5. Hold the iron between 15 and 30 centimeters away from the garment. 6. Press the Burst Of Steam Button once. 7. Steam will penetrate into the garment removing the wrinkles. 8. For Stubborn wrinkles, wait a few seconds before pressing the Burst Of Steam Button again. 9. Most wrinkles can be removed within three presses. Note: It may be necessary to press the burst of steam button a few times to start this function. For optimum steam quality, do not operate the Burst Of Steam more than three times after the pilot light goes off. BUILD-IN ANTI-SCALE SYSTEM The build-in anti-scale cartridge is designed to reduce the build-up of lime scale that occurs during steam ironing. This will prolong the working life of your iron. The anti-scale cartridge will not completely stop the natural process of lime scale build-up. SELF-CLEANING This function removes the scales and minerals built up in the Steam Chamber. The iron will remain in the best condition if this function is per...