Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. TAMPER-RESISTANT SCREW Warning : This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel. Note: If the power supply cord is damaged, it should be replaced personnel or in Latin America by an authorized service 2 AS200Pub1000000145RV2 1/19/06 10:36 AM Page 4 Product may vary slightly from what is illustrated. How to Use This appliance is for household use only. GETTING STARTED Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system. TO FILL THE WATER TANK: 1. Open the water-fill cover as shown in (A) . Symbols Dry B C Steam/Blast of Steam Spray 2. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B) . Do not overfill. 3. Close the water-fill cover. 4. Plug in the iron. The power on indicator light comes on (C) . Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing. 1. Spray nozzle 2. Water-fill cover 3. Dry/steam selector 4. Spray button 5. Surge-of-steam button 6. Power On/Auto Off indicator light 7. Soft touch handle 8. Heel rest 9. Temperature-ready light 10. Fabric-select dial 11. Water tank 12. Self-clean button 13. Soleplate D E FOR STEAM IRONING 1. Move the selector to the desired steam level (D) . 2. Read garment’s label to help you determine fabric type. Turn the fabric-select dial to appropriate setting (between 4 and 6) for your fabric (E) . The temperature ready light glows until it reaches the appropriate temperature. It then cycles on and off during ironing. 3. For optimum performance, let the iron stand for 90 seconds before beginning to iron. 4. When finished ironing, turn the fabric-select dial the selector to and unplug the iron. FOR DRY IRONING 1. Make sure selector is set to . You may want to empty the water (see “Emptying Water Tank After Ironing - . 2. Turn the fabric-select dial to the appropriate garment’s label to help you determine 10-MINUTE AUTO SHUTOFF 1. If you leave the iron on its iron will automatically shutoff indicator light stopped heating (F) . To turn it back on, starts heating again. F 3 4 5 6 2. When finished, unplug the iron and stand it on its heel rest. 3. If using seam, move the selctor to . SURGE OF STEAM • Horizontal 1. With the water tank filled to the MAX mark, set fabric dial to highest temperature setting and let iron stand on its heel rest about 30 seconds. 2. For best performance, use surge of steam at 5-second intervals. • Vertical 1. Be sure t...
Эта инструкция также подходит к моделям:Утюги - AS200 (1.44 mb)
Утюги - AS210 (1.44 mb)
Утюги - AS250 (1.44 mb)